Make README generic, accounting for various DEs

Add a deployment job
Support s6-rc for service control
2024-07-14 11:35:37 +02:00 · 2024-07-13 11:58:20 +02:00 · 2024-07-05 19:46:32 +02:00 · 2024-06-30 20:46:40 +02:00 · 2024-06-29 16:01:57 +02:00 · 2024-06-27 01:24:37 +02:00
30 changed files with 769 additions and 9435 deletions
--- a/.gitea/workflows/build.yaml
+++ b/.gitea/workflows/build.yaml
@ -0,0 +1,23 @@
+name: Build
+
+on:
+  push:
+    branches:
+      - '**'
+  pull_request:
+    branches: [master]
+
+jobs:
+  build:
+    runs-on: alpine
+    steps:
+      - name: Set up environment
+        shell: ash {0}
+        run: |
+          apk -U upgrade
+          apk add --no-cache git bash cmake build-base pkgconf glibmm-dev dbus-dev
+      - uses: actions/checkout@v4
+      - name: Build
+        run: |
+          cmake -B build
+          make -C build
--- a/.gitea/workflows/deploy.yaml
+++ b/.gitea/workflows/deploy.yaml
@ -0,0 +1,22 @@
+name: Deploy
+
+on:
+  push:
+    tags:
+      - '**'
+
+jobs:
+  deploy:
+    runs-on: buildenv
+    steps:
+      - uses: actions/checkout@v4
+      - name: Archive
+        run: |
+          DISTRIBUTION=$(echo $GITHUB_REF_NAME | awk '{ gsub(/^v/, "slack-timedate-"); print $0 }')
+          ln -s . $DISTRIBUTION
+          touch $DISTRIBUTION.tar.xz
+          tar --exclude="${DISTRIBUTION}/${DISTRIBUTION}*" --exclude-vcs -Jcvhf $DISTRIBUTION.tar.xz $DISTRIBUTION 
+      - uses: akkuman/gitea-release-action@v1
+        with:
+          files: "*.tar.xz"
+          token: ${{ secrets.API_KEY }}
--- a/.gitignore
+++ b/.gitignore
@ -0,0 +1,6 @@
+/.cache/
+/.deps/
+/CMakeFiles/
+CMakeCache.txt
+
+/build/
--- a/1
+++ b/1
@ -1 +0,0 @@
-Eugene Wissner <belka.ew@gmail.com>
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@ -0,0 +1,10 @@
+cmake_minimum_required(VERSION 3.21)
+project(slack-timedate)
+
+include(GNUInstallDirs)
+
+set(CMAKE_EXPORT_COMPILE_COMMANDS 1)
+set(CMAKE_CXX_STANDARD 17)
+
+add_subdirectory(data)
+add_subdirectory(src)
--- a/5
+++ b/5
@ -1,5 +0,0 @@
-==================== 1.1 ====================
-
-2012-01-22 Eugene Wissner <belka.ew@gmail.com>
-
-	* Added autotools scripts
--- a/370
+++ b/370
@ -1,370 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
-Inc.
-
-   Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.  This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
-   Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below.  The lack of an optional feature in a given package is not
-necessarily a bug.  More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-   The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
-
-     Running `configure' might take a while.  While running, it prints
-     some messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package, generally using the just-built uninstalled binaries.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.  When installing into a prefix owned by root, it is
-     recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
-     privileges.
-
-  5. Optionally, type `make installcheck' to repeat any self-tests, but
-     this time using the binaries in their final installed location.
-     This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
-     root privileges, verifies that the installation completed
-     correctly.
-
-  6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-  7. Often, you can also type `make uninstall' to remove the installed
-     files again.  In practice, not all packages have tested that
-     uninstallation works correctly, even though it is required by the
-     GNU Coding Standards.
-
-  8. Some packages, particularly those that use Automake, provide `make
-     distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
-     This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
-
-   With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-   On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
-this:
-
-     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CPP="gcc -E" CXXCPP="g++ -E"
-
-   This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
-   The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
-   The first method involves providing an override variable for each
-affected directory.  For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters.  On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-   Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
--enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
--disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
-     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
-
-   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
-
-     ./configure CC="cc"
-
-and if that doesn't work, try
-
-     ./configure CC="cc -nodtk"
-
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
-
-     ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS
-     KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug.  Until the bug is fixed you can use this workaround:
-
-     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
-     Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
-
-`--no-create'
-`-n'
-     Run the configure checks, but stop before creating any output
-     files.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
--- a/Makefile.am
+++ b/Makefile.am
@ -1,25 +0,0 @@
-dbus_servicesdir = $(datadir)/dbus-1/system-services
-dbus_confdir = $(sysconfdir)/dbus-1/system.d
-introspectiondir = $(datadir)/dbus-1/interfaces
-
-libexec_PROGRAMS = slack-timedate
-
-INCLUDES = $(GDBUS_CFLAGS)
-
-slack_timedate_SOURCES = slack-timedate.c slack-timedate.h
-slack_timedate_LDADD = $(GDBUS_LIBS)
-
-dbus_services_DATA = org.freedesktop.timedate1.service
-$(dbus_services_DATA): org.freedesktop.timedate1.service.in
-	$(AM_V_GEN)sed -e "s|\@LIBEXECDIR\@|$(libexecdir)|" $< > $@
-dbus_conf_DATA = org.freedesktop.timedate1.conf
-
-introspection_DATA = org.freedesktop.timedate1.xml
-
-EXTRA_DIST = \
-	$(dbus_services_DATA) \
-	$(dbus_conf_DATA) \
-	$(introspection_DATA)
-
-CLEANFILES = \
-	org.freedesktop.timedate1.service
--- a/Makefile.in
+++ b/Makefile.in
@ -1,761 +0,0 @@
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-libexec_PROGRAMS = slack-timedate$(EXEEXT)
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
-	ChangeLog INSTALL NEWS depcomp install-sh missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(libexecdir)" \
-	"$(DESTDIR)$(dbus_confdir)" "$(DESTDIR)$(dbus_servicesdir)" \
-	"$(DESTDIR)$(introspectiondir)"
-PROGRAMS = $(libexec_PROGRAMS)
-am_slack_timedate_OBJECTS = slack-timedate.$(OBJEXT)
-slack_timedate_OBJECTS = $(am_slack_timedate_OBJECTS)
-am__DEPENDENCIES_1 =
-slack_timedate_DEPENDENCIES = $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I.@am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(slack_timedate_SOURCES)
-DIST_SOURCES = $(slack_timedate_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-DATA = $(dbus_conf_DATA) $(dbus_services_DATA) $(introspection_DATA)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EXEEXT = @EXEEXT@
-GDBUS_CFLAGS = @GDBUS_CFLAGS@
-GDBUS_LIBS = @GDBUS_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-WARN_CFLAGS = @WARN_CFLAGS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-dbus_servicesdir = $(datadir)/dbus-1/system-services
-dbus_confdir = $(sysconfdir)/dbus-1/system.d
-introspectiondir = $(datadir)/dbus-1/interfaces
-INCLUDES = $(GDBUS_CFLAGS)
-slack_timedate_SOURCES = slack-timedate.c slack-timedate.h
-slack_timedate_LDADD = $(GDBUS_LIBS)
-dbus_services_DATA = org.freedesktop.timedate1.service
-dbus_conf_DATA = org.freedesktop.timedate1.conf
-introspection_DATA = org.freedesktop.timedate1.xml
-EXTRA_DIST = \
-	$(dbus_services_DATA) \
-	$(dbus_conf_DATA) \
-	$(introspection_DATA)
-
-CLEANFILES = \
-	org.freedesktop.timedate1.service
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-am--refresh: Makefile
-	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-install-libexecPROGRAMS: $(libexec_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libexecdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libexecdir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-libexecPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(libexecdir)" && rm -f $$files
-
-clean-libexecPROGRAMS:
-	-test -z "$(libexec_PROGRAMS)" || rm -f $(libexec_PROGRAMS)
-slack-timedate$(EXEEXT): $(slack_timedate_OBJECTS) $(slack_timedate_DEPENDENCIES) $(EXTRA_slack_timedate_DEPENDENCIES) 
-	@rm -f slack-timedate$(EXEEXT)
-	$(LINK) $(slack_timedate_OBJECTS) $(slack_timedate_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/slack-timedate.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-dbus_confDATA: $(dbus_conf_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dbus_conf_DATA)'; test -n "$(dbus_confdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(dbus_confdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(dbus_confdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dbus_confdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dbus_confdir)" || exit $$?; \
-	done
-
-uninstall-dbus_confDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dbus_conf_DATA)'; test -n "$(dbus_confdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(dbus_confdir)'; $(am__uninstall_files_from_dir)
-install-dbus_servicesDATA: $(dbus_services_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dbus_services_DATA)'; test -n "$(dbus_servicesdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(dbus_servicesdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(dbus_servicesdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dbus_servicesdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dbus_servicesdir)" || exit $$?; \
-	done
-
-uninstall-dbus_servicesDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dbus_services_DATA)'; test -n "$(dbus_servicesdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(dbus_servicesdir)'; $(am__uninstall_files_from_dir)
-install-introspectionDATA: $(introspection_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(introspection_DATA)'; test -n "$(introspectiondir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(introspectiondir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(introspectiondir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(introspectiondir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(introspectiondir)" || exit $$?; \
-	done
-
-uninstall-introspectionDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(introspection_DATA)'; test -n "$(introspectiondir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(introspectiondir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(dbus_confdir)" "$(DESTDIR)$(dbus_servicesdir)" "$(DESTDIR)$(introspectiondir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libexecPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dbus_confDATA install-dbus_servicesDATA \
-	install-introspectionDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-libexecPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dbus_confDATA uninstall-dbus_servicesDATA \
-	uninstall-introspectionDATA uninstall-libexecPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-libexecPROGRAMS ctags dist dist-all \
-	dist-bzip2 dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ \
-	dist-xz dist-zip distcheck distclean distclean-compile \
-	distclean-generic distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am \
-	install-dbus_confDATA install-dbus_servicesDATA install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am \
-	install-introspectionDATA install-libexecPROGRAMS install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-dbus_confDATA \
-	uninstall-dbus_servicesDATA uninstall-introspectionDATA \
-	uninstall-libexecPROGRAMS
-
-$(dbus_services_DATA): org.freedesktop.timedate1.service.in
-	$(AM_V_GEN)sed -e "s|\@LIBEXECDIR\@|$(libexecdir)|" $< > $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
--- a/5
+++ b/5
@ -1,5 +0,0 @@
-=============
-Version 3.1.1
-=============
-
-Added autotools scripts
--- a/15
+++ b/15
@ -1,15 +0,0 @@
-slack-timedate
-==============
-
-This program implements timedated1 interface from systemd what is
-required by GNOME Control Center for now.
-slack-timedate's purpose is to make it possible to enjoy full GNOME
-functionality on Slackware Linux which doesn't use systemd as its
-init-system.
-
-
-============
-Dependencies
-============
-glib
-dbus
--- a/README.md
+++ b/README.md
@ -0,0 +1,61 @@
+# slack-timedate
+
+This program implements timedated1 interface from systemd that is
+required by GNOME Control Center and can be used by KDE Settings.
+
+slack-timedate's purpose is to make it possible to enjoy full desktop
+environment functionality on Slackware Linux which doesn't use
+systemd as its init-system.
+
+slack-timedate supports Slackware's System V style init system as well
+as s6.
+
+## Installation
+
+```sh
+cmake -B build \
+  -DCMAKE_INSTALL_PREFIX=/usr \
+  -DCMAKE_INSTALL_SYSCONFDIR=/etc
+make -C build
+make -C build install
+```
+
+The installation will create a file `build/install_manifest.txt`, which
+contains a list of all files installed in the system. To uninstall the
+application those should be removed, for example by doing:
+
+```sh
+xargs rm < build/install_manifest.txt
+```
+
+## Debugging
+
+Firstly an application is required that changes the time settings over the
+timedate1 service. It can be `gnome-control-center` or `kcmshell5 kcm_clock`
+for KDE.
+
+Then running `dbus-monitor --system` as root can be used to see the
+communication between the control center and this service.
+
+Messages to the D-Bus service can also be sent with `dbus-send`. For example
+to get the list of time zones:
+
+```sh
+dbus-send --system --print-reply --type=method_call \
+  --dest=org.freedesktop.timedate1 \
+  /org/freedesktop/timedate1 org.freedesktop.timedate1.ListTimezones
+```
+
+To get a value of a property:
+
+```sh
+dbus-send --system --print-reply \
+  --dest=org.freedesktop.timedate1 \
+  /org/freedesktop/timedate1 org.freedesktop.DBus.Properties.Get \
+  string:org.freedesktop.timedate1 string:NTP
+```
+
+## Dependencies
+
+- glib
+- dbus
--- a/aclocal.m4
+++ b/aclocal.m4
--- a/4959
+++ b/4959
--- a/configure.ac
+++ b/configure.ac
@ -1,17 +0,0 @@
-AC_PREREQ([2.69])
-AC_INIT([slack-timedate], [1.1], [belka.ew@gmail.com])
-AC_CONFIG_SRCDIR([slack-timedate.h])
-AC_CONFIG_FILES([Makefile])
-
-AM_INIT_AUTOMAKE
-AM_MAINTAINER_MODE([enable])
-
-# Checks for programs.
-AC_PROG_CC
-
-GNOME_DEBUG_CHECK
-GNOME_COMPILE_WARNINGS([maximum])
-
-PKG_CHECK_MODULES([GDBUS], [gio-2.0 dbus-1])
-
-AC_OUTPUT
--- a/data/CMakeLists.txt
+++ b/data/CMakeLists.txt
@ -0,0 +1,18 @@
+find_program(SED sed)
+
+configure_file("${CMAKE_CURRENT_SOURCE_DIR}/resources.h.in" "resources.h")
+
+add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/org.freedesktop.timedate1.service
+	COMMAND ${SED} -e s|@LIBEXECDIR@|${CMAKE_INSTALL_FULL_LIBEXECDIR}| ${CMAKE_CURRENT_SOURCE_DIR}/org.freedesktop.timedate1.service.in > ${PROJECT_BINARY_DIR}/org.freedesktop.timedate1.service
+	MAIN_DEPENDENCY org.freedesktop.timedate1.service.in
+	VERBATIM)
+add_custom_target(service ALL DEPENDS ${PROJECT_BINARY_DIR}/org.freedesktop.timedate1.service)
+
+install(FILES org.freedesktop.timedate1.xml
+	DESTINATION ${CMAKE_INSTALL_DATADIR}/dbus-1/interfaces)
+install(FILES org.freedesktop.timedate1.policy
+	DESTINATION ${CMAKE_INSTALL_DATADIR}/polkit-1/actions)
+install(FILES org.freedesktop.timedate1.conf
+	DESTINATION ${CMAKE_INSTALL_SYSCONFDIR}/dbus-1/system.d)
+install(FILES ${PROJECT_BINARY_DIR}/org.freedesktop.timedate1.service
+	DESTINATION ${CMAKE_INSTALL_DATADIR}/dbus-1/system-services)
--- a/data/org.freedesktop.timedate1.conf
+++ b/data/org.freedesktop.timedate1.conf
--- a/data/org.freedesktop.timedate1.policy
+++ b/data/org.freedesktop.timedate1.policy
@ -0,0 +1,41 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE policyconfig PUBLIC "-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN" "http://www.freedesktop.org/standards/PolicyKit/1/policyconfig.dtd">
+<policyconfig>
+	<vendor>slack-timedate</vendor>
+
+	<action id="org.freedesktop.timedate1.set-time">
+		<message>Changes the system clock</message>
+		<defaults>
+			<allow_any>auth_admin_keep</allow_any>
+            <allow_inactive>auth_admin_keep</allow_inactive>
+            <allow_active>auth_admin_keep</allow_active>
+		</defaults>
+	</action>
+
+	<action id="org.freedesktop.timedate1.set-timezone">
+		<message>Sets the system timezone</message>
+		<defaults>
+			<allow_any>auth_admin_keep</allow_any>
+            <allow_inactive>auth_admin_keep</allow_inactive>
+            <allow_active>auth_admin_keep</allow_active>
+		</defaults>
+	</action>
+
+	<action id="org.freedesktop.timedate1.set-local-rtc">
+		<message>Controls whether the RTC is in local time or UTC</message>
+		<defaults>
+			<allow_any>auth_admin_keep</allow_any>
+            <allow_inactive>auth_admin_keep</allow_inactive>
+            <allow_active>auth_admin_keep</allow_active>
+		</defaults>
+	</action>
+
+	<action id="org.freedesktop.timedate1.set-ntp">
+		<message>Controls whether the system clock is synchronized with the network</message>
+		<defaults>
+			<allow_any>auth_admin_keep</allow_any>
+            <allow_inactive>auth_admin_keep</allow_inactive>
+            <allow_active>auth_admin_keep</allow_active>
+		</defaults>
+	</action>
+</policyconfig>
--- a/data/org.freedesktop.timedate1.service.in
+++ b/data/org.freedesktop.timedate1.service.in
--- a/data/org.freedesktop.timedate1.xml
+++ b/data/org.freedesktop.timedate1.xml
@ -5,6 +5,10 @@
  <property name="Timezone" type="s" access="read"/>
  <property name="LocalRTC" type="b" access="read"/>
  <property name="NTP" type="b" access="read"/>
+  <property name="CanNTP" type="b" access="read"/>
+  <property name="NTPSynchronized" type="b" access="read"/>
+  <property name="TimeUSec" type="t" access="read"/>
+  <property name="RTCTimeUSec" type="t" access="read"/>
  <method name="SetTime">
   <arg name="usec_utc" type="x" direction="in"/>
   <arg name="relative" type="b" direction="in"/>
@ -23,5 +27,8 @@
   <arg name="use_ntp" type="b" direction="in"/>
   <arg name="user_interaction" type="b" direction="in"/>
  </method>
+  <method name="ListTimezones">
+   <arg name="timezones" type="as" direction="out"/>
+  </method>
 </interface>
 </node>
--- a/data/resources.h.in
+++ b/data/resources.h.in
@ -0,0 +1 @@
+#define DATADIR_INTERFACES "@CMAKE_INSTALL_PREFIX@/@CMAKE_INSTALL_DATADIR@/dbus-1/interfaces"
--- a/708
+++ b/708
@ -1,708 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2012-03-27.16; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by 'PROGRAMS ARGS'.
-  object      Object file output by 'PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputting dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-# A tabulation character.
-tab='	'
-# A newline character.
-nl='
-'
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
-   # This is just like msvc7 but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
-   # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
-   gccflag=-qmakedep=gcc,-MF
-   depmode=gcc
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' "$nl" < "$tmpdepfile" |
-## Some versions of gcc put a space before the ':'.  On the theory
-## that the space means something, we add a space to the output as
-## well.  hp depmode also adds that space, but also prefixes the VPATH
-## to the object.  Take care to not repeat it in the output.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-      | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like '#:fec' to the end of the
-    # dependency line.
-    tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr "$nl" ' ' >> "$depfile"
-    echo >> "$depfile"
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' "$nl" < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-xlc)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts '$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form 'foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # '$object: dependent.h' and one to simply 'dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
-  # However on
-  #    $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using '\':
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-  # tcc 0.9.26 (FIXME still under development at the moment of writing)
-  # will emit a similar output, but also prepend the continuation lines
-  # with horizontal tabulation characters.
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form 'foo.o: dependent.h',
-  # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # '$object: dependent.h' and one to simply 'dependent.h:'.
-  sed -e "s/^[ $tab][ $tab]*/  /" -e "s,^[^:]*:,$object :," \
-    < "$tmpdepfile" > "$depfile"
-  sed '
-    s/[ '"$tab"'][ '"$tab"']*/ /g
-    s/^ *//
-    s/ *\\*$//
-    s/^[^:]*: *//
-    /^$/d
-    /:$/d
-    s/$/ :/
-  ' < "$tmpdepfile" >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add 'dependent.h:' lines.
-    sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in 'foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-msvc7)
-  if test "$libtool" = yes; then
-    showIncludes=-Wc,-showIncludes
-  else
-    showIncludes=-showIncludes
-  fi
-  "$@" $showIncludes > "$tmpdepfile"
-  stat=$?
-  grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  # The first sed program below extracts the file names and escapes
-  # backslashes for cygpath.  The second sed program outputs the file
-  # name when reading, but also accumulates all include files in the
-  # hold buffer in order to output them again at the end.  This only
-  # works with sed implementations that can handle large buffers.
-  sed < "$tmpdepfile" -n '
-/^Note: including file:  *\(.*\)/ {
-  s//\1/
-  s/\\/\\\\/g
-  p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
-  s/.*/'"$tab"'/
-  G
-  p
-}' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvc7msys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove '-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for ':'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  # makedepend may prepend the VPATH from the source file name to the object.
-  # No need to regex-escape $object, excess matching of '.' is harmless.
-  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove '-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
-  echo "$tab" >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
--- a/527
+++ b/527
@ -1,527 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2011-01-19.21; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-	shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
-
-    -o) chowncmd="$chownprog $2"
-	shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t) dst_arg=$2
-	# Protect names problematic for `test' and other utilities.
-	case $dst_arg in
-	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
-	esac
-	shift;;
-
-    -T) no_target_directory=true;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names problematic for `test' and other utilities.
-  case $src in
-    -* | [=\(\)!]) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-    dst=$dst_arg
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix='/';;
-	[-=\(\)!]*) prefix='./';;
-	*)  prefix='';;
-      esac
-
-      eval "$initialize_posix_glob"
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob set -f
-      set fnord $dstdir
-      shift
-      $posix_glob set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test X"$d" = X && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
-
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
--- a/331
+++ b/331
@ -1,331 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2012-01-06.13; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
--run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
--- a/slack-timedate.c
+++ b/slack-timedate.c
@ -1,269 +0,0 @@
-/*
- * Copyright (C) 2013  Eugene Wissner <belka.ew@gmail.com>
- * 
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include <gio/gio.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/time.h>
-#include <sys/stat.h>
-
-#include "slack-timedate.h"
-
-static void slack_method_call (GDBusConnection *connection, const gchar *sender, const gchar *object_path, const gchar *interface_name, const gchar *method_name, GVariant *parameters, GDBusMethodInvocation *invocation, gpointer user_data) {
-	gchar *timezone, *response;
-	gboolean user_interaction, relative, is_localtime, use_ntp;
-	gint64 usec_utc;
-
-	// Set time zone
-	if (g_strcmp0 (method_name, "SetTimezone") == 0) {
-		g_variant_get (parameters, "(&sb)", &timezone, &user_interaction);
-
-		if (slack_set_timezone (timezone)) g_dbus_method_invocation_return_value (invocation,
-				NULL);
-		else g_dbus_method_invocation_return_error (invocation,
-				G_IO_ERROR,
-				G_IO_ERROR_FAILED,
-				"Write operation failed");
-
-		g_free (timezone);
-    } else if (g_strcmp0 (method_name, "SetTime") == 0) {
-		g_variant_get (parameters, "(xbb)", &usec_utc, &relative, &user_interaction);
-
-		// Set time
-		//if (!slack_set_time (usec_utc, slack_get_is_localtime ())) {
-		if (slack_set_time (usec_utc)) g_dbus_method_invocation_return_value (invocation,
-				NULL);
-		else g_dbus_method_invocation_return_error (invocation,
-				G_IO_ERROR,
-				G_IO_ERROR_FAILED,
-				"Failed to set system clock");
-    } else if (g_strcmp0 (method_name, "SetNTP") == 0) {
-		g_variant_get (parameters, "(bb)", &use_ntp, &user_interaction);
-
-		// Enable NTP
-		if (slack_set_ntp (use_ntp)) g_dbus_method_invocation_return_value (invocation,
-				NULL);
-		else g_dbus_method_invocation_return_error (invocation,
-				G_IO_ERROR,
-				G_IO_ERROR_FAILED,
-				"Error enabling NTP");
-	}
-	return ;
-}
-
-static GVariant *slack_get_property (GDBusConnection *connection, const gchar *sender, const gchar *object_path, const gchar *interface_name, const gchar *prop_name, GError **slack_err, gpointer user_data) {
-	if (g_strcmp0 ("Timezone", prop_name) == 0) {
-		return g_variant_new_string (slack_get_timezone ());
-	} if (g_strcmp0 ("LocalRTC", prop_name) == 0) {
-		return g_variant_new_boolean (slack_get_is_localtime ());
-	} if (g_strcmp0 ("NTP", prop_name) == 0) {
-		return g_variant_new_boolean (slack_get_ntp ());
-	}
-	return NULL;
-}
-
-static void on_timedate_acquired (GDBusConnection *connection, const gchar *name, gpointer user_data) {
-	guint registration_id;
-	GDBusNodeInfo *introspection_data;
-	GError *slack_err;
-	const GDBusInterfaceVTable interface_vtable = {
-		slack_method_call,
-		slack_get_property,
-		NULL
-	};
-
-	slack_err = NULL;
-	introspection_data = g_dbus_node_info_new_for_xml (INTROSPECTION_XML, &slack_err);
-	if (introspection_data == NULL)
-		g_error ("Failed to parse D-Bus introspection XML: %s\n", slack_err->message);
-
-	slack_err = NULL;
-	registration_id = g_dbus_connection_register_object (connection,
-			BUS_PATH,
-			introspection_data->interfaces[0],
-			&interface_vtable,
-			NULL,
-			NULL,
-			&slack_err);
-
-	if (registration_id <= 0) {
-		g_critical ("Failed to register callbacks for the exported object with the D-Bus interface: %s\n", slack_err->message);
-		g_error_free (slack_err);
-	}
-
-	g_dbus_node_info_unref (introspection_data);
-}
-
-static void on_timedate_lost (GDBusConnection *connection, const gchar *name, gpointer user_data) {
-	g_warning ("Failed to acquire the service %s.\n", name);
-	exit (1);
-}
-
-gboolean timeout_callback (gpointer loop2quit) {
-	g_main_loop_quit ((GMainLoop *)loop2quit);
-	return FALSE;
-}
-
-int main (int argc, char **argv) {
-	guint owner_id;
-	GMainLoop *loop;
-
-	g_type_init ();
-
-	owner_id = g_bus_own_name (G_BUS_TYPE_SYSTEM,
-			BUS_NAME,
-			G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT |
-			G_BUS_NAME_OWNER_FLAGS_REPLACE,
-			on_timedate_acquired,
-			NULL,
-			on_timedate_lost,
-			NULL,
-			NULL);
-
-	loop = g_main_loop_new (NULL, FALSE);
-	g_timeout_add_seconds (DEFAULT_EXIT_SEC, timeout_callback , loop); 
-	g_main_loop_run (loop);
-
-	g_bus_unown_name (owner_id);
-
-	return EXIT_SUCCESS;
-}
-
-
-gchar *slack_get_timezone () {
-	gchar *zone_copied_from, *zone;
-
-	zone_copied_from = g_file_read_link ("/etc/localtime-copied-from", NULL);
-	if (zone_copied_from == NULL) return NULL;
-
-	zone = g_strdup (zone_copied_from + strlen ("/usr/share/zoneinfo/") * sizeof (gchar));
-	g_free (zone_copied_from);
-
-	return zone;
-}
-
-gboolean slack_set_timezone (gchar *zone) {
-	gchar *zone_file;
-	GFile *etc_localtime, *localtime_link, *g_zone_file;
-
-	zone_file = g_strconcat ("/usr/share/zoneinfo/", zone, NULL);
-	if (g_file_test (zone_file, G_FILE_TEST_IS_REGULAR)) {
-		etc_localtime = g_file_new_for_path ("/etc/localtime");
-		localtime_link = g_file_new_for_path ("/etc/localtime-copied-from");
-		g_zone_file = g_file_new_for_path (zone_file);
-
-		if (!g_file_copy (g_zone_file, etc_localtime, G_FILE_COPY_OVERWRITE, NULL, NULL, NULL, NULL)) {
-			return FALSE;
-		}
-
-		if (!g_file_delete (localtime_link, NULL, NULL)) {
-			return FALSE;
-		}
-		if (!g_file_make_symbolic_link (localtime_link, zone_file, NULL, NULL)) {
-			return FALSE;
-		}
-
-		g_free (zone_file);
-		g_object_unref (etc_localtime);
-		g_object_unref (localtime_link);
-		g_object_unref (g_zone_file);
-	} else {
-		return FALSE;
-	}
-	return TRUE;
-}
-
-gboolean slack_set_time (gint64 seconds_since_epoch) {
-	struct timespec ts;
-/*	gint exit_status;
-	gboolean spawn_status;
-	gchar *cmd;*/
-
-	// Set system clock
-	ts.tv_sec = (time_t) (seconds_since_epoch / USEC_PER_SEC);
-	ts.tv_nsec = 0;
-	if (clock_settime (CLOCK_REALTIME, &ts)) {
-		return FALSE;
-	}
-
-	// Don't save the system time to the hardware clock. The saving takes much
-	// time. Anyway it is saved automatically on shutdown.
-	/* Set hardware clock
-	if (!g_file_test ("/sbin/hwclock", G_FILE_TEST_EXISTS | G_FILE_TEST_IS_REGULAR | G_FILE_TEST_IS_EXECUTABLE)) {
-		return FALSE;
-	}
-	cmd = g_strdup_printf ("/sbin/hwclock %s --systohc", is_localtime ? "--localtime" : "-u");
-	spawn_status = g_spawn_command_line_sync (cmd, NULL, NULL, &exit_status, NULL);
-	g_free (cmd);
-	if ((WEXITSTATUS (exit_status) != 0) || !spawn_status) {
-		return FALSE;
-	}*/
-
-	return TRUE;
-}
-
-gboolean slack_get_is_localtime () {
-	FILE *fh;
-	char time_str[10]; // "localtime" is longer than "UTC" and has 9 letters + \0
-	gboolean is_localtime;
-
-	is_localtime = FALSE;
-
-	fh = fopen ("/etc/hardwareclock", "r");
-	if (fh == NULL) return FALSE;
-	while (fgets (time_str, 10, fh)) {
-		if (!g_strcmp0 (time_str, "localtime")) {
-			is_localtime = TRUE;
-			break;
-		}
-	}
-
-	fclose (fh);
-	return is_localtime;
-}
-
-gboolean slack_get_ntp () {
-	if (g_file_test ("/etc/rc.d/rc.ntpd", G_FILE_TEST_IS_EXECUTABLE))
-		return TRUE;
-	else return FALSE;
-}
-
-gboolean slack_set_ntp (gboolean xntp) {
-	mode_t rc_mode;
-
-	rc_mode = S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH;
-
-	if (xntp) {
-		rc_mode |= S_IXUSR | S_IXGRP | S_IXOTH;
-		g_message ("Please don't forget to configure the NTP daemon");
-
-		/* It doesn't matter if fails.
-		 * The ntpdate command is considered obsolete, but "orthodox" ntpd -g
-		 * will fail if your system clock is off for more than half an hour. */
-		g_spawn_command_line_async ("/usr/sbin/ntpdate pool.ntp.org", NULL);
-	}
-
-	if (g_file_test ("/etc/rc.d/rc.ntpd", G_FILE_TEST_IS_REGULAR)) {
-		if (chmod ("/etc/rc.d/rc.ntpd", rc_mode)) return FALSE;
-		else return TRUE;
-	} else {
-		g_error ("The NTP daemon isn't installed");
-		return FALSE;
-	}
-}
--- a/slack-timedate.h
+++ b/slack-timedate.h
@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2013  Eugene Wissner <belka.ew@gmail.com>
- * 
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include <dbus/dbus.h>
-
-#define BUS_NAME "org.freedesktop.timedate1"
-#define BUS_PATH "/org/freedesktop/timedate1"
-#define BUS_INTERFACE "org.freedesktop.timedate1"
-
-#define INTROSPECTION_XML DBUS_INTROSPECT_1_0_XML_DOCTYPE_DECL_NODE \
-	"<node>\n" \
-	" <interface name=\"org.freedesktop.timedate1\">\n"             \
-	"  <property name=\"Timezone\" type=\"s\" access=\"read\"/>\n"  \
-	"  <property name=\"LocalRTC\" type=\"b\" access=\"read\"/>\n"  \
-	"  <property name=\"NTP\" type=\"b\" access=\"read\"/>\n"       \
-	"  <method name=\"SetTime\">\n"                                 \
-	"   <arg name=\"usec_utc\" type=\"x\" direction=\"in\"/>\n"     \
-	"   <arg name=\"relative\" type=\"b\" direction=\"in\"/>\n"     \
-	"   <arg name=\"user_interaction\" type=\"b\" direction=\"in\"/>\n" \
-	"  </method>\n"                                                 \
-	"  <method name=\"SetTimezone\">\n"                             \
-	"   <arg name=\"timezone\" type=\"s\" direction=\"in\"/>\n"     \
-	"   <arg name=\"user_interaction\" type=\"b\" direction=\"in\"/>\n" \
-	"  </method>\n"                                                 \
-	"  <method name=\"SetLocalRTC\">\n"                             \
-	"   <arg name=\"local_rtc\" type=\"b\" direction=\"in\"/>\n"    \
-	"   <arg name=\"fix_system\" type=\"b\" direction=\"in\"/>\n"   \
-	"   <arg name=\"user_interaction\" type=\"b\" direction=\"in\"/>\n" \
-	"  </method>\n"                                                 \
-	"  <method name=\"SetNTP\">\n"                                  \
-	"   <arg name=\"use_ntp\" type=\"b\" direction=\"in\"/>\n"      \
-	"   <arg name=\"user_interaction\" type=\"b\" direction=\"in\"/>\n" \
-	"  </method>\n"                                                 \
-	" </interface>\n"												\
-	"</node>\n"
-
-#define DEFAULT_EXIT_SEC 300
-#define USEC_PER_SEC  1000000ULL
-
-// Returns the system time zone
-gchar *slack_get_timezone ();
-
-// Sets the system time zone to the one passed by the argument
-// Returns true on success, false otherwise
-gboolean slack_set_timezone (gchar *);
-
-// Changes the date/time
-// Takes the amount of seconds since UNIX epoche and 
-// Returns true on success, false otherwise
-gboolean slack_set_time (gint64);
-//gboolean slack_set_time (gint64, gboolean);
-
-// Returns if the hardware clock is set to local time or not
-gboolean slack_get_is_localtime ();
-
-// Returns if NTP is enabled
-gboolean slack_get_ntp ();
-
-// Sets NTP
-gboolean slack_set_ntp (gboolean);
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@ -0,0 +1,10 @@
+find_package(PkgConfig)
+pkg_check_modules(GDBUS REQUIRED gio-2.0 dbus-1 glibmm-2.4 giomm-2.4)
+
+add_executable(slack-timedate main.cpp
+	timedate.cpp timedate.h
+)
+target_include_directories(slack-timedate PRIVATE ${CMAKE_BINARY_DIR}/data ${GDBUS_INCLUDE_DIRS})
+target_link_libraries(slack-timedate ${GDBUS_LIBRARIES})
+
+install(TARGETS slack-timedate DESTINATION ${CMAKE_INSTALL_LIBEXECDIR})
--- a/src/main.cpp
+++ b/src/main.cpp
@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2013-2024  Eugen Wissner <belka@caraus.de>
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "timedate.h"
+
+bool timeout_callback(Glib::RefPtr<Glib::MainLoop> loop2quit)
+{
+    loop2quit->quit();
+    return false;
+}
+
+constexpr unsigned int default_exit_sec = 300;
+
+int main(int argc, char **argv)
+{
+    Gio::init();
+    auto timedate1 = std::make_unique<dlackware::timedate::timedate1>();
+
+    guint owner_id = Gio::DBus::own_name(Gio::DBus::BUS_TYPE_SYSTEM,
+            Glib::ustring(dlackware::timedate::bus_name.cbegin(), dlackware::timedate::bus_name.cend()),
+            std::bind(&dlackware::timedate::timedate1::on_bus_acquired, timedate1.get(),
+                std::placeholders::_1, std::placeholders::_2),
+            Gio::DBus::SlotNameAcquired(),
+            std::bind(&dlackware::timedate::timedate1::on_name_lost, timedate1.get(),
+                std::placeholders::_1, std::placeholders::_2),
+            Gio::DBus::BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT | Gio::DBus::BUS_NAME_OWNER_FLAGS_REPLACE);
+
+    Glib::RefPtr<Glib::MainLoop> loop = Glib::MainLoop::create(false);
+
+    Glib::signal_timeout().connect_seconds(sigc::bind(&timeout_callback, loop), default_exit_sec);
+    loop->run();
+
+    Gio::DBus::unown_name(owner_id);
+
+    return EXIT_SUCCESS;
+}
--- a/src/timedate.cpp
+++ b/src/timedate.cpp
@ -0,0 +1,439 @@
+/*
+ * Copyright (C) 2013-2024  Eugen Wissner <belka@caraus.de>
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <cstring>
+#include <filesystem>
+#include <fstream>
+#include <iostream>
+#include <string>
+#include <sys/timex.h>
+#include "timedate.h"
+
+static void slack_method_call(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& sender,
+        const Glib::ustring& object_path, const Glib::ustring& interface_name, const Glib::ustring& method_name,
+        const Glib::VariantContainerBase& parameters, const Glib::RefPtr<Gio::DBus::MethodInvocation>& invocation)
+{
+    // Set time zone
+    if (method_name == "SetTimezone")
+    {
+        Glib::Variant<Glib::ustring> timezone;
+        Glib::Variant<bool> user_interaction;
+
+        parameters.get_child(timezone, 0);
+        parameters.get_child(user_interaction, 1);
+        try
+        {
+            dlackware::timedate::set_timezone(timezone.get(), user_interaction.get());
+            invocation->return_value(Glib::VariantContainerBase());
+        }
+        catch (const std::filesystem::filesystem_error& filesystem_error)
+        {
+            invocation->return_error(Gio::DBus::Error{ Gio::DBus::Error::FAILED, filesystem_error.what() });
+        }
+    }
+    else if (method_name == "SetLocalRTC")
+    {
+        Glib::Variant<bool> local_rtc;
+        Glib::Variant<bool> fix_system;
+        Glib::Variant<bool> user_interaction;
+
+        parameters.get_child(local_rtc, 0);
+        parameters.get_child(fix_system, 1);
+        parameters.get_child(user_interaction, 2);
+
+        try
+        {
+            dlackware::timedate::set_local_rtc(local_rtc.get(), fix_system.get(), user_interaction.get());
+            invocation->return_value(Glib::VariantContainerBase());
+        }
+        catch (const std::system_error& error)
+        {
+            invocation->return_error(Gio::DBus::Error{ Gio::DBus::Error::FAILED, error.what() });
+        }
+        catch (const Glib::SpawnError& spawn_error)
+        {
+            invocation->return_error(Gio::DBus::Error{ Gio::DBus::Error::FAILED, spawn_error.what() });
+        }
+    }
+    else if (method_name == "SetTime")
+    {
+        Glib::Variant<gint64> usec_utc;
+        Glib::Variant<bool> relative;
+        Glib::Variant<bool> user_interaction;
+
+        parameters.get_child(usec_utc, 0);
+        parameters.get_child(relative, 1);
+        parameters.get_child(user_interaction, 2);
+
+        try
+        {
+            dlackware::timedate::set_time(usec_utc.get(), relative.get(), user_interaction.get());
+            invocation->return_value(Glib::VariantContainerBase());
+        }
+        catch (const std::system_error& error)
+        {
+            invocation->return_error(Gio::DBus::Error{ Gio::DBus::Error::FAILED, error.what() });
+        }
+    }
+    else if (method_name == "SetNTP")
+    {
+        Glib::Variant<bool> use_ntp;
+        Glib::Variant<bool> user_interaction;
+
+        parameters.get_child(use_ntp, 0);
+        parameters.get_child(user_interaction, 1);
+
+        // Enable NTP
+        try
+        {
+            dlackware::timedate::set_ntp(use_ntp.get(), user_interaction.get());
+            invocation->return_value(Glib::VariantContainerBase());
+        }
+        catch (const std::filesystem::filesystem_error& filesystem_error)
+        {
+            invocation->return_error(Gio::DBus::Error{ Gio::DBus::Error::FAILED, filesystem_error.what() });
+        }
+    }
+    else if (method_name == "ListTimezones")
+    {
+        try
+        {
+            auto return_tuple = Glib::VariantContainerBase::create_tuple({
+                    Glib::Variant<std::vector<Glib::ustring>>::create(dlackware::timedate::list_timezones())
+            });
+            invocation->return_value(return_tuple);
+        }
+        catch (const std::exception& exception)
+        {
+            Gio::DBus::Error error{ Gio::DBus::Error::FAILED, exception.what() };
+            invocation->return_error(error);
+        }
+    }
+}
+
+static void slack_get_property(Glib::VariantBase& result, const Glib::RefPtr<Gio::DBus::Connection>& connection,
+        const Glib::ustring& sender, const Glib::ustring& object_path, const Glib::ustring& interface_name,
+        const Glib::ustring& prop_name)
+{
+    if (prop_name == "Timezone")
+    {
+        result = Glib::Variant<Glib::ustring>::create(dlackware::timedate::timezone());
+    }
+    else if (prop_name == "LocalRTC")
+    {
+        result = Glib::Variant<bool>::create(dlackware::timedate::local_rtc());
+    }
+    else if (prop_name == "NTP")
+    {
+        result = Glib::Variant<bool>::create(dlackware::timedate::ntp());
+    }
+    else if (prop_name == "CanNTP")
+    {
+        result = Glib::Variant<bool>::create(dlackware::timedate::can_ntp());
+    }
+    else if (prop_name == "NTPSynchronized")
+    {
+        result = Glib::Variant<bool>::create(dlackware::timedate::ntp_synchronized());
+    }
+    else if (prop_name == "TimeUSec")
+    {
+        result = Glib::Variant<std::uint64_t>::create(dlackware::timedate::time_usec());
+    }
+    else if (prop_name == "RTCTimeUSec")
+    {
+        result = Glib::Variant<std::uint64_t>::create(dlackware::timedate::rtc_time_usec());
+    }
+}
+
+namespace dlackware::timedate
+{
+    timedate1::timedate1()
+        : interface_vtable{ &slack_method_call, &slack_get_property }
+    {
+    }
+
+    void timedate1::on_name_lost(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name)
+    {
+        g_warning("Failed to acquire the service %s.\n", name.data());
+        exit(1);
+    }
+
+    void timedate1::on_bus_acquired(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name)
+    {
+        Glib::RefPtr<Gio::DBus::NodeInfo> introspection_data;
+        try
+        {
+            auto introspection_xml = Glib::file_get_contents(
+                    (std::filesystem::path(DATADIR_INTERFACES) / dlackware::timedate::bus_name).concat(".xml")
+            );
+            introspection_data = Gio::DBus::NodeInfo::create_for_xml(introspection_xml);
+        }
+        catch (Glib::Error& slack_err)
+        {
+            g_error("Failed to parse D-Bus introspection XML: %s\n", slack_err.what().data());
+        }
+        try
+        {
+            guint registration_id = connection->register_object(bus_path,
+                    introspection_data->lookup_interface(), this->interface_vtable);
+        }
+        catch (Glib::Error& slack_err)
+        {
+            g_critical("Failed to register callbacks for the exported object with the D-Bus interface: %s\n",
+                    slack_err.what().data());
+        }
+    }
+
+    static void list_timezones(const std::string& prefix, std::vector<Glib::ustring>& accumulator)
+    {
+        auto zoneinfo_path = std::filesystem::path(zoneinfo_database) / prefix;
+
+        for (auto zoneinfo_entry : std::filesystem::directory_iterator(zoneinfo_path))
+        {
+            auto new_prefix = prefix + zoneinfo_entry.path().filename().string();
+
+            if (zoneinfo_entry.is_directory())
+            {
+                list_timezones(new_prefix + "/", accumulator);
+            }
+            else if (zoneinfo_entry.is_regular_file() && !zoneinfo_entry.path().has_extension()
+                    && zoneinfo_entry.path().filename() != "leapseconds")
+            {
+                accumulator.emplace_back(new_prefix);
+            }
+        }
+    }
+
+    std::vector<Glib::ustring> list_timezones()
+    {
+        std::vector<Glib::ustring> result;
+
+        list_timezones("", result);
+        return result;
+    }
+
+    Glib::ustring timezone()
+    {
+        std::unique_ptr<gchar[], decltype(&g_free)> zone_copied_from(
+                g_file_read_link("/etc/localtime", NULL), &g_free);
+
+        if (zone_copied_from == nullptr)
+        {
+            return nullptr;
+        }
+        return Glib::ustring{ zone_copied_from.get() + zoneinfo_database.size() + 1 };
+    }
+
+    void set_timezone(const Glib::ustring& zone, bool)
+    {
+        auto zone_file = std::filesystem::path("/usr/share/zoneinfo") / zone.data();
+        std::error_code ec{};
+
+        if (!std::filesystem::is_regular_file(zone_file, ec))
+        {
+            throw std::filesystem::filesystem_error("Zone info is not a regular file", zone_file, ec);
+        }
+        std::filesystem::path etc_localtime = "/etc/localtime";
+
+        std::filesystem::remove(etc_localtime);
+        std::filesystem::create_symlink(zone_file, etc_localtime);
+    }
+
+    void set_ntp(bool use_ntp, bool)
+    {
+        try
+        {
+            std::string service_state = use_ntp ? "-u" : "-d";
+            const auto command_flags = Glib::SpawnFlags::SPAWN_SEARCH_PATH
+                | Glib::SpawnFlags::SPAWN_STDERR_TO_DEV_NULL | Glib::SpawnFlags::SPAWN_STDERR_TO_DEV_NULL;
+            int wait_status{-1};
+
+            Glib::spawn_sync("", std::vector<std::string>{ "s6-rc", service_state, "change", "ntpd" },
+                    command_flags, {}, nullptr, nullptr, &wait_status);
+
+            if (wait_status == 0 || wait_status == 0x300) // Unknown service name in the arguments.
+            {
+                return;
+            }
+        }
+        catch (const Glib::SpawnError& spawn_error)
+        {
+        }
+        std::filesystem::perms rc_mode = std::filesystem::perms::owner_read | std::filesystem::perms::owner_write
+            | std::filesystem::perms::group_read | std::filesystem::perms::others_read;
+
+        if (use_ntp)
+        {
+            rc_mode |= std::filesystem::perms::owner_exec
+                | std::filesystem::perms::group_exec | std::filesystem::perms::others_exec;
+        }
+        std::error_code ec;
+        const std::filesystem::path service_path{ "/etc/rc.d/rc.ntpd" };
+
+        if (std::filesystem::is_regular_file(service_path, ec))
+        {
+            std::filesystem::permissions("/etc/rc.d/rc.ntpd", rc_mode);
+        }
+        else
+        {
+            throw std::filesystem::filesystem_error("The NTP daemon isn't installed", service_path, ec);
+        }
+    }
+
+    void set_time(std::int64_t usec_utc, bool relative, bool)
+    {
+        timespec ts;
+        std::chrono::system_clock::duration current_time_since_epoch;
+
+        if (relative)
+        {
+            current_time_since_epoch = std::chrono::system_clock::now().time_since_epoch();
+            current_time_since_epoch += std::chrono::microseconds(usec_utc);
+        }
+        else
+        {
+            current_time_since_epoch = std::chrono::microseconds(usec_utc);
+        }
+        auto seconds_since_epoch = std::chrono::floor<std::chrono::seconds>(current_time_since_epoch);
+
+        ts.tv_sec = seconds_since_epoch.count();
+        ts.tv_nsec = std::chrono::duration_cast<std::chrono::microseconds>(
+                current_time_since_epoch - seconds_since_epoch).count();
+
+        if (clock_settime(CLOCK_REALTIME, &ts) == -1)
+        {
+            throw std::system_error(errno, std::generic_category());
+        }
+    }
+
+    void set_local_rtc(bool local_rtc, bool fix_system, bool)
+    {
+        std::ofstream hardwareclock{ "/etc/hardwareclock", std::ios::trunc };
+        std::string hwclock_argument;
+
+        hardwareclock << "# /etc/hardwareclock" << std::endl
+            << "#" << std::endl
+            << "# Tells how the hardware clock time is stored." << std::endl
+            << "# You should run timeconfig to edit this file." << std::endl
+            << std::endl;
+
+        if (local_rtc)
+        {
+            hwclock_argument = "--localtime";
+            hardwareclock << "localtime";
+        }
+        else
+        {
+            hwclock_argument = "--utc";
+            hardwareclock << "UTC";
+        }
+        hardwareclock << std::endl;
+
+        if (!fix_system)
+        {
+            Glib::spawn_sync("", std::vector<std::string>{ "/sbin/hwclock", hwclock_argument, "--hctosys" },
+                    Glib::SpawnFlags::SPAWN_STDOUT_TO_DEV_NULL | Glib::SpawnFlags::SPAWN_STDERR_TO_DEV_NULL,
+                    {}, nullptr, nullptr, static_cast<int *>(nullptr));
+        }
+    }
+
+    bool local_rtc()
+    {
+        std::ifstream fh{ "/etc/hardwareclock", std::ios::in };
+        if (!fh.is_open())
+        {
+            return false;
+        }
+        std::array<char, 10> time_str; // "localtime" is longer than "UTC" and has 9 letters + \0
+
+        while (fh.good())
+        {
+            fh.getline(time_str.data(), time_str.size());
+            fh.clear(fh.rdstate() & (~std::ios_base::failbit));
+
+            if (std::strncmp(time_str.data(), "localtime", time_str.size()) == 0)
+            {
+                return true;
+            }
+        }
+        return false;
+    }
+
+    bool ntp()
+    {
+        return Glib::file_test("/etc/rc.d/rc.ntpd", Glib::FileTest::FILE_TEST_IS_EXECUTABLE);
+    }
+
+    bool can_ntp()
+    {
+        std::string standard_output;
+        int wait_status{-1};
+
+        try
+        {
+            Glib::spawn_sync("", std::vector<std::string>{ "s6-rc-db", "type", "ntpd" },
+                    Glib::SpawnFlags::SPAWN_SEARCH_PATH | Glib::SpawnFlags::SPAWN_STDERR_TO_DEV_NULL,
+                    {}, &standard_output, nullptr, &wait_status);
+        }
+        catch (const Glib::SpawnError& spawn_error)
+        {
+            return std::filesystem::exists("/etc/rc.d/rc.ntpd");
+        }
+        return wait_status == 0 && standard_output == "bundle\n";
+    }
+
+    bool ntp_synchronized()
+    {
+        timex buffer{ .modes = 0 };
+        int ntp_result = adjtimex(&buffer);
+
+        if (ntp_result == -1)
+        {
+            throw std::system_error(errno, std::generic_category());
+        }
+        return ntp_result != TIME_ERROR && (buffer.status & STA_UNSYNC) == 0;
+    }
+
+    std::uint64_t time_usec()
+    {
+        timespec spec;
+
+        if (clock_gettime(CLOCK_REALTIME, &spec) == -1)
+        {
+            throw std::system_error(errno, std::generic_category());
+        }
+        time_t seconds = spec.tv_sec;
+        tm time;
+
+        if (local_rtc())
+        {
+            gmtime_r(&seconds, &time);
+        }
+        else
+        {
+            localtime_r(&seconds, &time);
+        }
+        return std::chrono::duration_cast<std::chrono::microseconds>(
+                std::chrono::seconds(std::mktime(&time)) + std::chrono::nanoseconds(spec.tv_nsec)).count();
+    }
+
+    std::uint64_t rtc_time_usec()
+    {
+        return std::chrono::duration_cast<std::chrono::microseconds>(
+                std::chrono::system_clock::now().time_since_epoch()).count();
+    }
+}
--- a/src/timedate.h
+++ b/src/timedate.h
@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2013-2024  Eugen Wissner <belka@caraus.de>
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <dbus/dbus.h>
+#include <glibmm.h>
+#include <giomm.h>
+#include "resources.h"
+
+namespace dlackware::timedate
+{
+    constexpr const char *bus_path = "/org/freedesktop/timedate1";
+    constexpr const std::string_view bus_name = "org.freedesktop.timedate1";
+    constexpr const std::string_view zoneinfo_database = "/usr/share/zoneinfo";
+
+    // Returns the system time zone.
+    Glib::ustring timezone();
+
+    // Returns if the hardware clock is set to local time or not
+    bool local_rtc();
+
+    // Returns whether NTP is enabled.
+    bool ntp();
+
+    // Returns whether NTP is available.
+    bool can_ntp();
+
+    // Shows whether the kernel reports the time as synchronized.
+    bool ntp_synchronized();
+
+    // Shows the current time in the RTC.
+    std::uint64_t rtc_time_usec();
+
+    // Shows the current time on the system.
+    std::uint64_t time_usec();
+
+    // Returns the timezones available on the system.
+    std::vector<Glib::ustring> list_timezones();
+
+    // Sets the system time zone to the one passed by the argument
+    // Throws std::filesystem::filesystem_error.
+    void set_timezone(const Glib::ustring& zone, bool user_interaction);
+
+    // Sets NTP
+    // Throws std::filesystem::filesystem_error.
+    void set_ntp(bool use_ntp, bool user_interaction);
+
+    // Changes the date/time
+    // Takes the amount of seconds since UNIX epoche and 
+    // Throws std::system_error.
+    void set_time(std::int64_t usec_utc, bool relative, bool user_interaction);
+
+    // Controls whether the RTC is local time or UTC.
+    void set_local_rtc(bool local_rtc, bool fix_system, bool user_interaction);
+
+    class timedate1
+    {
+        const Gio::DBus::InterfaceVTable interface_vtable;
+
+    public:
+        timedate1();
+
+        void on_bus_acquired(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);
+        void on_name_lost(const Glib::RefPtr<Gio::DBus::Connection>& connection, const Glib::ustring& name);
+    };
+}
Author	SHA1	Message	Date
Eugen Wissner	c21f6d2b64	Make README generic, accounting for various DEs All checks were successful Build / build (push) Successful in 18s Details	2024-07-14 11:35:37 +02:00
Eugen Wissner	29434bc41e	Add a deployment job All checks were successful Build / build (push) Successful in 14s Details Deploy / deploy (push) Successful in 4s Details	2024-07-13 11:58:20 +02:00
Eugen Wissner	c97f1fc87c	Support s6-rc for service control All checks were successful Build / build (push) Successful in 16s Details	2024-07-05 19:46:32 +02:00
Eugen Wissner	78f9939afc	Fix setting the clock by one hour back All checks were successful Build / build (push) Successful in 17s Details	2024-06-30 20:46:40 +02:00
Eugen Wissner	8bf3a92cbc	Implement SetLocalRTC All checks were successful Build / build (push) Successful in 16s Details	2024-06-29 16:01:57 +02:00
Eugen Wissner	d75053b243	Implement TimeUSec property All checks were successful Build / build (push) Successful in 16s Details	2024-06-27 01:24:37 +02:00
Eugen Wissner	b11e18e560	Implement TimeUSecRTC property All checks were successful Build / build (push) Successful in 20s Details	2024-06-24 13:09:00 +02:00
Eugen Wissner	3a85891f2e	Replace ntp_adjtime with adjtimex All checks were successful Build / build (push) Successful in 19s Details ntp_adjtime is not supported by musl.	2024-06-22 10:24:39 +02:00
Eugen Wissner	cbbefae284	Add the NTPSynchronized property Some checks failed Build / build (push) Failing after 19s Details	2024-06-21 16:07:28 +02:00
Eugen Wissner	6fc7f86a89	Implement CanNTP property All checks were successful Build / build (push) Successful in 18s Details	2024-06-19 12:11:56 +02:00
Eugen Wissner	9dc8fb2640	Generate path configuration file All checks were successful Build / build (push) Successful in 18s Details	2024-06-18 11:19:44 +02:00
Eugen Wissner	7b5fe4b9d1	Separate service implementation from the main All checks were successful Build / build (push) Successful in 21s Details	2024-06-18 10:20:18 +02:00
Eugen Wissner	bbb4efde18	Report errors from clock_gettime and clock_settime All checks were successful Build / build (push) Successful in 16s Details	2024-06-15 11:34:37 +02:00
Eugen Wissner	ad19cb19d1	Read installed XML on start All checks were successful Build / build (push) Successful in 17s Details	2024-06-13 19:47:56 +02:00
Eugen Wissner	e72976840c	Report back SetNTP errors All checks were successful Build / build (push) Successful in 19s Details	2024-06-13 13:09:52 +02:00
Eugen Wissner	8d43caadcc	Use glibmm API for variants All checks were successful Build / build (push) Successful in 16s Details	2024-06-10 16:42:09 +02:00
Eugen Wissner	ed6c87638f	Remove user_data parameter All checks were successful Build / build (push) Successful in 17s Details	2024-06-09 13:42:07 +02:00
Eugen Wissner	c28c96aec4	Use giomm DBus interface	2024-06-09 12:17:27 +02:00
Eugen Wissner	9d20748c5c	Fix linking a zone info to localtime All checks were successful Build / build (push) Successful in 19s Details	2024-06-05 11:34:23 +02:00
Eugen Wissner	9c95b1f864	Take the timezone link from /etc/localtime All checks were successful Build / build (push) Successful in 18s Details	2024-06-04 14:56:11 +02:00
Eugen Wissner	263d91efb5	Handle ListTimezones errors All checks were successful Build / build (push) Successful in 19s Details	2024-06-02 14:57:09 +02:00
Eugen Wissner	c6036e4d2d	List the zoneinfo directory All checks were successful Build / build (push) Successful in 20s Details	2024-05-31 17:01:04 +02:00
Eugen Wissner	ed136d3b9a	Add a stub method to query the time zones All checks were successful Build / build (push) Successful in 15s Details	2024-05-24 23:01:16 +02:00
Eugen Wissner	0eccfe3ef3	Split the data and sources All checks were successful Build / build (push) Successful in 16s Details	2024-05-21 18:58:15 +02:00
Eugen Wissner	81232f6104	Add debugging information to the README All checks were successful Build / build (push) Successful in 17s Details	2024-05-20 10:54:14 +02:00
Eugen Wissner	328c22c409	Add a build job All checks were successful Build / build (push) Successful in 15s Details	2024-05-17 10:26:09 +02:00
Eugen Wissner	b8bb1c78ae	Rewrite slack_get_is_localtime with ifstreams	2024-05-15 22:16:57 +02:00
Eugen Wissner	33819d2eb9	Remove deprecated g_type_init	2024-04-19 10:14:53 +02:00
Eugen Wissner	75fd7cf0cc	Remove the AUTHORS file	2024-04-17 09:41:54 +02:00
Eugen Wissner	81cce23aba	Add a gitignore file	2024-04-16 15:52:17 +02:00
Eugen Wissner	5f35df67c2	Support relative time in SetTime	2024-04-14 10:49:28 +02:00
Eugen Wissner	729e175e6b	Replace autotools with CMake	2024-04-12 15:13:18 +02:00
Eugen Wissner	479a390eff	Update the non existing contact email	2024-04-08 16:57:22 +02:00
Eugen Wissner	457e48a4cf	Add policy configuration	2024-04-07 12:36:03 +02:00
				`@ -0,0 +1 @@`
				`#define DATADIR_INTERFACES "@CMAKE_INSTALL_PREFIX@/@CMAKE_INSTALL_DATADIR@/dbus-1/interfaces"`