Add mpv bindings file

Since it doesn't support other architectures.

.config/aerc/aerc.conf

@@ -0,0 +1,859 @@
+#
+# aerc main configuration
+
+[general]
+#
+# Used as a default path for save operations if no other path is specified.
+# ~ is expanded to the current user home dir.
+#
+#default-save-path=
+
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. If set to "internal", the internal openpgp keyring will be used.
+# If set to "auto", the system gpg will be preferred unless the internal
+# keyring already exists, in which case the latter will be used.
+#
+# Default: auto
+#pgp-provider=auto
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+#unsafe-accounts-conf=false
+
+# Output log messages to specified file. A path starting with ~/ is expanded to
+# the user home dir. When redirecting aerc's output to a file using > shell
+# redirection, this setting is ignored and log messages are printed to stdout.
+#
+#log-file=
+
+# Only log messages above the specified level to log-file. Supported levels
+# are: trace, debug, info, warn and error. When redirecting aerc's output to
+# a file using > shell redirection, this setting is ignored and the log level
+# is forced to trace.
+#
+# Default: info
+#log-level=info
+
+# Disable IPC entirely. Don't run commands (including mailto:... and mbox:...)
+# in an existing aerc instance, and don't start an IPC server to allow
+# subsequent aerc instances to run commands in the current one.
+#
+# Default: false
+#disable-ipc=false
+
+# Don't run mailto:... commands over IPC; start a new aerc instance with the
+# composer instead.
+#
+# Default: false
+#disable-ipc-mailto=false
+#
+# Don't run mbox:... commands over IPC; start a new aerc instance with the mbox
+# file instead.
+#
+# Default: false
+#disable-ipc-mbox=false
+
+# Set the $TERM environment variable used for the embedded terminal.
+#
+# Default: xterm-256color
+#term=xterm-256color
+
+# Display OSC8 strings in the embedded terminal
+#
+# Default: false
+#enable-osc8=false
+
+# Default shell command to use for :menu. This will be executed with sh -c and
+# will run in an popover dialog.
+#
+# Any occurrence of %f will be replaced by a temporary file path where the
+# command is expected to write output lines to be consumed by :menu. Otherwise,
+# the lines will be read from the command's standard output.
+#
+# Examples:
+#   default-menu-cmd=fzf
+#   default-menu-cmd=fzf --multi
+#   default-menu-cmd=dmenu -l 20
+#   default-menu-cmd=ranger --choosefiles=%f
+#
+#default-menu-cmd=
+
+[ui]
+#
+# Describes the format for each row in a mailbox view. This is a comma
+# separated list of column names with an optional align and width suffix. After
+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
+# characters can be added (by default, left) followed by an optional width
+# specifier. The width is either an integer representing a fixed number of
+# characters, or a percentage between 1% and 99% representing a fraction of the
+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
+# width specifiers. Auto width columns will be equally attributed the remaining
+# terminal width. Fit width columns take the width of their contents. If no
+# width specifier is set, '*' is used by default.
+#
+# Default: flags:4,name<20%,subject,date>=
+#index-columns=flags:4,name<20%,subject,date>=
+
+#
+# Each name in index-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Here are some examples to show the To field instead of the From field for
+# an email (modifying column-name):
+#
+# 1. a generic one
+#   column-name={{ .Peer | names | join ", " }}
+# 2. based upon the selected folder
+#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
+#
+# Default settings
+#column-flags={{.Flags | join ""}}
+#column-name={{index (.From | names) 0}}
+#column-subject={{.ThreadPrefix}}{{.Subject}}
+#column-date={{.DateAutoFormat .Date.Local}}
+
+#
+# String separator inserted between columns. When the column width specifier is
+# an exact number of characters, the separator is added to it (i.e. the exact
+# width will be fully available for the column contents).
+#
+# Default: "  "
+#column-separator="  "
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006 Jan 02
+#timestamp-format=2006 Jan 02
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is empty, timestamp-format is used instead.
+#
+# Default: 15:04
+#this-day-time-format=15:04
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is empty, timestamp-format is used instead.
+#
+# Default: Jan 02
+#this-week-time-format=Jan 02
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is empty, timestamp-format is used instead.
+#
+#Default: Jan 02
+#this-year-time-format=Jan 02
+
+#
+# Overrides timestamp-format for the message view.
+#
+# Default: 2006 Jan 02, 15:04 GMT-0700
+#message-view-timestamp-format=2006 Jan 02, 15:04 GMT-0700
+
+#
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent today.
+#
+#message-view-this-day-time-format=
+
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent within the last 7 days.
+#
+#message-view-this-week-time-format=
+
+#
+# If set, overrides *timestamp-format* in the message view for messages
+# that were received/sent this year.
+#
+#message-view-this-year-time-format=
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 22
+#sidebar-width=22
+
+#
+# Default split layout for message list tabs. The syntax is:
+#
+#       [<direction>] <size>
+#
+# <direction> is optional and defaults to horizontal. It can take one
+# of the following values: h, horiz, horizontal, v, vert, vertical.
+#
+# <size> is a positive integer representing the size (in terminal cells)
+# of the message list window.
+#
+#message-list-split=
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+#empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+#empty-dirlist=(no folders)
+#
+# Value to set {{.Subject}} template to when subject is empty.
+#
+# Default: (no subject)
+#empty-subject=(no subject)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+mouse-enabled=true
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+#new-message-bell=true
+
+#
+# Template to use for Account tab titles
+#
+# Default: {{.Account}}
+#tab-title-account={{.Account}}
+
+#
+# Template to use for Composer tab titles
+#
+# Default: {{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+#tab-title-composer={{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+
+#
+# Template to use for Message Viewer tab titles
+#
+# Default: {{.Subject}}
+#tab-title-viewer={{.Subject}}
+
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+#pinned-tab-marker='`'
+
+# Template for the left side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{.Folder}}
+#dirlist-left={{.Folder}}
+
+# Template for the right side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{if .Unread}}{{humanReadable .Unread}}{{end}}
+#dirlist-right={{if .Unread}}{{humanReadable .Unread}}{{end}}
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+#dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+dirlist-tree=true
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+#dirlist-collapse=0
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+#sort=
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+#next-message-on-delete=true
+
+# Automatically set the "seen" flag when a message is opened in the message
+# viewer.
+#
+# Default: true
+#auto-mark-read=true
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /usr/local/share/aerc/stylesets
+#   /usr/share/aerc/stylesets
+#
+#stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: "│" and "─"
+#border-char-vertical="│"
+#border-char-horizontal="─"
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+styleset-name=pink
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+# searched in the command or option in any position, and need not be
+# consecutive characters in the command or option.
+#
+# Default: false
+#fuzzy-complete=false
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+#completion-delay=250ms
+
+# The minimum required characters to allow auto-completion to be triggered after
+# completion-delay.
+#
+# Setting this to "manual" disables automatic completion, leaving only the
+# manually triggered completion with the $complete key (see aerc-binds(5) for
+# more details).
+#
+# Default: 1
+#completion-min-chars=1
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+#completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+# Reverses the order of the message list. By default, the message list is
+# ordered with the newest (highest UID) message on top. Reversing the order
+# will put the oldest (lowest UID) message on top. This can be useful in cases
+# where the backend does not support sorting.
+#
+# Default: false
+#reverse-msglist-order = false
+
+# Reverse display of the message threads. Default order is the initial
+# message is on the top with all the replies being displayed below. The
+# reverse option will put the initial message at the bottom with the
+# replies on top.
+#
+# Default: false
+#reverse-thread-order=false
+
+# Positions the cursor on the last message in the message list (at the
+# bottom of the view) when opening a new folder.
+#
+# Default: false
+#select-last-message=false
+
+# Sort the thread siblings according to the sort criteria for the messages. If
+# sort-thread-siblings is false, the thread siblings will be sorted based on
+# the message UID in ascending order. This option is only applicable for
+# client-side threading with a backend that enables sorting. Note that there's
+# a performance impact when sorting is activated.
+#
+# Default: false
+#sort-thread-siblings=false
+
+# Set the scroll offset in number of lines from the top and bottom of the
+# message list.
+#
+# Default: 0
+#msglist-scroll-offset = 0
+
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+threading-enabled=true
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# If no References nor In-Reply-To headers can be matched to build client side
+# threads, fallback to similar subjects.
+#
+# Default: false
+#threading-by-subject=false
+
+# Show thread context enables messages which do not match the current query (or
+# belong to the current mailbox) to be shown for context. These messages can be
+# styled separately using "msglist_thread_context" in a styleset. This feature
+# is not supported by all backends
+#
+# Default: false
+#show-thread-context=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+#
+# Thread prefix customization:
+
+#
+# Customize the thread prefix appearance by selecting the arrow head.
+#
+# Default: ">"
+#thread-prefix-tip = ">"
+
+#
+# Customize the thread prefix appearance by selecting the arrow indentation.
+#
+# Default: " "
+#thread-prefix-indent = " "
+
+#
+# Customize the thread prefix appearance by selecting the vertical extension of
+# the arrow.
+#
+# Default: "│"
+#thread-prefix-stem = "│"
+
+#
+# Customize the thread prefix appearance by selecting the horizontal extension
+# of the arrow.
+#
+# Default: ""
+#thread-prefix-limb = ""
+
+#
+# Customize the thread prefix appearance by selecting the folded thread
+# indicator.
+#
+# Default: "+"
+#thread-prefix-folded = "+"
+
+#
+# Customize the thread prefix appearance by selecting the unfolded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-unfolded = ""
+
+#
+# Customize the thread prefix appearance by selecting the first child connector.
+#
+# Default: ""
+#thread-prefix-first-child = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if
+# the message has siblings.
+#
+# Default: "├─"
+#thread-prefix-has-siblings = "├─"
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and no children.
+#
+# Default: ""
+#thread-prefix-lone = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector for the last
+# sibling.
+#
+# Default: "└─"
+#thread-prefix-last-sibling = "└─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# the last sibling.
+#
+# Default: "┌─"
+#thread-prefix-last-sibling-reverse = "┌─"
+
+#
+# Customize the thread prefix appearance by selecting the connector for dummy
+# thread.
+#
+# Default: "┬─"
+#thread-prefix-dummy = "┬─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# dummy thread.
+#
+# Default: "┴─"
+#thread-prefix-dummy-reverse = "┴─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the first child
+# connector.
+#
+# Default: ""
+#thread-prefix-first-child-reverse = ""
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector
+# used if the message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan-reverse = ""
+
+[statusline]
+#
+# Describes the format for the status line. This is a comma separated list of
+# column names with an optional align and width suffix. See [ui].index-columns
+# for more details. To completely mute the status line except for push
+# notifications, explicitly set status-columns to an empty string.
+#
+# Default: left<*,center:=,right>*
+#status-columns=left<*,center:=,right>*
+
+#
+# Each name in status-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-left=[{{.Account}}] {{.StatusInfo}}
+#column-center={{.PendingKeys}}
+#column-right={{.TrayInfo}} | {{cwd}}
+
+#
+# String separator inserted between columns.
+# See [ui].column-separator for more details.
+#
+#column-separator=" "
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+#separator=" | "
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+#display-mode=text
+
+[viewer]
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -Rc
+#pager=less -Rc
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+#alternatives=text/plain,text/html
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+#show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+#header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+#always-show-mime=false
+
+# Define the maximum height of the mimetype switcher before a scrollbar is used.
+# The height of the mimetype switcher is restricted to half of the display
+# height. If the provided value for the height is zero, the number of parts will
+# be used as the height of the type switcher.
+#
+# Default: 0
+#max-mime-height = 0
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+#parse-http-links=true
+
+[compose]
+#
+# Specifies the command to run the editor with. It will be shown in an embedded
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+#editor=
+
+#
+# When set, aerc will create and read .eml files for composing that have
+# non-standard \n linebreaks. This is only relevant if the used editor does not
+# support CRLF linebreaks.
+#
+#lf-editor=false
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+#header-layout=To|From,Subject
+
+#
+# Edit headers into the text editor instead than separate fields.
+#
+# When this is true, address-book-cmd is not supported and address completion
+# is left to the editor itself. Also, displaying multiple headers on the same
+# line is not possible.
+#
+# Default: false
+#edit-headers=false
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+#address-book-cmd=
+
+# Specifies the command to be used to select attachments. Any occurrence of
+# '%s' in the file-picker-cmd will be replaced with the argument <arg>
+# to :attach -m <arg>. Any occurence of '%f' will be replaced by the
+# location of a temporary file, from which aerc will read the selected files.
+#
+# If '%f' is not present, the command must output the selected files to
+# standard output, one file per line. If it is present, then aerc does not
+# capture the standard output and instead reads the files from the temporary
+# file which should have the same format.
+#file-picker-cmd=
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+#reply-to-self=true
+
+# Warn before sending an email with an empty subject.
+#
+# Default: false
+#empty-subject-warning=false
+
+#
+# Warn before sending an email that matches the specified regexp but does not
+# have any attachments. Leave empty to disable this feature.
+#
+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
+# "(?im)" flags are set by default (case-insensitive and multi-line).
+#
+# Example:
+# no-attachment-warning=^[^>]*attach(ed|ment)
+#
+#no-attachment-warning=
+
+#
+# When set, aerc will generate "format=flowed" bodies with a content type of
+# "text/plain; format=flowed" as described in RFC3676. This format is easier to
+# handle for some mailing software, and generally just looks like ordinary
+# text. To actually make use of this format's features, you'll need support in
+# your editor.
+#
+#format-flowed=false
+
+[multipart-converters]
+#
+# Converters allow to generate multipart/alternative messages by converting the
+# main text/plain part into any other MIME type. Only exact MIME types are
+# accepted. The commands are invoked with sh -c and are expected to output
+# valid UTF-8 text.
+#
+# Example (obviously, this requires that you write your main text/plain body
+# using the markdown syntax):
+#text/html=pandoc -f markdown -t html --standalone
+
+[filters]
+#
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The commands are invoked with sh -c. The following folders are prepended to
+# the system $PATH to allow referencing filters from their name only:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
+#   ~/.local/libexec/aerc/filters
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
+#   $PREFIX/libexec/aerc/filters
+#   $PREFIX/share/aerc/filters
+#   /usr/libexec/aerc/filters
+#   /usr/share/aerc/filters
+#
+# If you want to run a program in your default $PATH which has the same name
+# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
+#
+# The following variables are defined in the filter command environment:
+#
+#   AERC_MIME_TYPE      the part MIME type/subtype
+#   AERC_FORMAT         the part content type format= parameter
+#   AERC_FILENAME       the attachment filename (if any)
+#   AERC_SUBJECT        the message Subject header value
+#   AERC_FROM           the message From header value
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+#
+text/plain=colorize
+text/calendar=calendar
+message/delivery-status=colorize
+message/rfc822=colorize
+#text/html=pandoc -f html -t plain | colorize
+#text/html=html | colorize
+#text/*=bat -fP --file-name="$AERC_FILENAME"
+#application/x-sh=bat -fP -l sh
+#image/*=catimg -w $(tput cols) -
+#subject,~Git(hub|lab)=lolcat -f
+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
+
+# This special filter is only used to post-process email headers when
+# [viewer].show-headers=true
+# By default, headers are piped directly into the pager.
+#
+.headers=colorize
+
+[openers]
+#
+# Openers allow you to specify the command to use for the :open and :open-link
+# actions on a per-MIME-type basis. The :open-link URL scheme is used to
+# determine the MIME type as follows: x-scheme-handler/<scheme>.
+#
+# {} is expanded as the temporary filename or URL to be opened with proper
+# shell quoting. If it is not encountered in the command, the filename/URL will
+# be appended to the end of the command. The command will then be executed with
+# `sh -c`.
+#
+# Like [filters], openers support basic shell globbing. The first opener which
+# matches the part's MIME type (or URL scheme handler MIME type) will be used,
+# so order them from most to least specific.
+#
+# Examples:
+# x-scheme-handler/irc=hexchat
+# x-scheme-handler/http*=printf '%s' {} | wl-copy
+# text/html=surf -dfgms
+# text/plain=gvim {} +125
+# message/rfc822=thunderbird
+
+[hooks]
+#
+# Hooks are triggered whenever the associated event occurs.
+
+#
+# Executed when a new email arrives in the selected folder
+#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
+
+#
+# Executed when mail is deleted from a folder
+#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc adds mail to a folder
+#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc starts
+#aerc-startup=aerc :terminal calcurse && aerc :next-tab
+
+#
+# Executed when aerc shuts down.
+#aerc-shutdown=
+
+#
+# Executed when notmuch tags are modified.
+#tag-modified=
+
+#
+# Executed when flags are changed on a message.
+#flag-changed=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+[templates]
+# Templates are used to populate email bodies automatically.
+#
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /usr/local/share/aerc/templates
+#   /usr/share/aerc/templates
+#
+#template-dirs=
+
+# The default template to be used for new messages.
+#
+# default: new_message
+#new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+#quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+#forwards=forward_as_body

.config/aerc/binds.conf

@@ -0,0 +1,184 @@
+# Binds are of the form <key sequence> = <command to run>
+# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
+# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+\[t = :prev-tab<Enter>
+\]t = :next-tab<Enter>
+<C-t> = :term<Enter>
+? = :help keys<Enter>
+<C-c> = :prompt 'Quit?' quit<Enter>
+<C-q> = :prompt 'Quit?' quit<Enter>
+<C-z> = :suspend<Enter>
+
+[messages]
+q = :prompt 'Quit?' quit<Enter>
+
+j = :next<Enter>
+<Down> = :next<Enter>
+<C-d> = :next 50%<Enter>
+<C-f> = :next 100%<Enter>
+<PgDn> = :next 100%<Enter>
+
+k = :prev<Enter>
+<Up> = :prev<Enter>
+<C-u> = :prev 50%<Enter>
+<C-b> = :prev 100%<Enter>
+<PgUp> = :prev 100%<Enter>
+g = :select 0<Enter>
+G = :select -1<Enter>
+
+J = :next-folder<Enter>
+<C-Down> = :next-folder<Enter>
+K = :prev-folder<Enter>
+<C-Up> = :prev-folder<Enter>
+H = :collapse-folder<Enter>
+<C-Left> = :collapse-folder<Enter>
+L = :expand-folder<Enter>
+<C-Right> = :expand-folder<Enter>
+
+v = :mark -t<Enter>
+<Space> = :mark -t<Enter>:next<Enter>
+V = :mark -v<Enter>
+
+T = :toggle-threads<Enter>
+zc = :fold<Enter>
+zo = :unfold<Enter>
+za = :fold -t<Enter>
+zM = :fold -a<Enter>
+zR = :unfold -a<Enter>
+<tab> = :fold -t<Enter>
+
+zz = :align center<Enter>
+zt = :align top<Enter>
+zb = :align bottom<Enter>
+
+<Enter> = :view<Enter>
+d = :choose -o y 'Really delete this message' delete-message<Enter>
+D = :delete<Enter>
+a = :archive flat<Enter>
+A = :unmark -a<Enter>:mark -T<Enter>:archive flat<Enter>
+
+C = :compose<Enter>
+m = :compose<Enter>
+
+b = :bounce<space>
+
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+c = :cf<space>
+$ = :term<space>
+! = :term<space>
+| = :pipe<space>
+
+/ = :search<space>
+\ = :filter<space>
+n = :next-result<Enter>
+N = :prev-result<Enter>
+<Esc> = :clear<Enter>
+
+s = :split<Enter>
+S = :vsplit<Enter>
+
+pl = :patch list<Enter>
+pa = :patch apply <Tab>
+pd = :patch drop <Tab>
+pb = :patch rebase<Enter>
+pt = :patch term<Enter>
+ps = :patch switch <Tab>
+
+[messages:folder=Drafts]
+<Enter> = :recall<Enter>
+
+[view]
+/ = :toggle-key-passthrough<Enter>/
+q = :close<Enter>
+O = :open<Enter>
+o = :open<Enter>
+S = :save<space>
+| = :pipe<space>
+D = :delete<Enter>
+A = :archive flat<Enter>
+
+<C-l> = :open-link <space>
+
+f = :forward<Enter>
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+H = :toggle-headers<Enter>
+<C-k> = :prev-part<Enter>
+<C-Up> = :prev-part<Enter>
+<C-j> = :next-part<Enter>
+<C-Down> = :next-part<Enter>
+J = :next<Enter>
+<C-Right> = :next<Enter>
+K = :prev<Enter>
+<C-Left> = :prev<Enter>
+
+[view::passthrough]
+$noinherit = true
+$ex = <C-x>
+<Esc> = :toggle-key-passthrough<Enter>
+
+[compose]
+# Keybindings used when the embedded terminal is not selected in the compose
+# view
+$noinherit = true
+$ex = <C-x>
+$complete = <C-o>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<A-p> = :switch-account -p<Enter>
+<C-Left> = :switch-account -p<Enter>
+<A-n> = :switch-account -n<Enter>
+<C-Right> = :switch-account -n<Enter>
+<tab> = :next-field<Enter>
+<backtab> = :prev-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::editor]
+# Keybindings used when the embedded terminal is selected in the compose view
+$noinherit = true
+$ex = <C-x>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::review]
+# Keybindings used when reviewing a message to be sent
+# Inline comments are used as descriptions on the review screen
+y = :send<Enter> # Send
+n = :abort<Enter> # Abort (discard message, no confirmation)
+v = :preview<Enter> # Preview message
+p = :postpone<Enter> # Postpone
+q = :choose -o d discard abort -o p postpone postpone<Enter> # Abort or postpone
+e = :edit<Enter> # Edit
+a = :attach<space> # Add attachment
+d = :detach<space> # Remove attachment
+
+[terminal]
+$noinherit = true
+$ex = <C-x>
+
+<C-p> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-PgDn> = :next-tab<Enter>

.config/git/ignore

@@ -1,2 +1,3 @@
 .symfony.local.yaml
 /application.yml
+.env.sh

.config/mpv/input.conf

@@ -0,0 +1,2 @@
+# Makes speech in the older DVDs louder.
+F1 af toggle "lavfi=[loudnorm=I=-16]"

.config/nvim/after/ftplugin/haskell.vim

@@ -1,6 +0,0 @@
-set tabstop=8
-set expandtab
-set softtabstop=4
-set shiftwidth=4
-set shiftround
-"setlocal omnifunc=v:lua.vim.lsp.omnifunc

.config/nvim/after/ftplugin/php.vim

@@ -1,4 +0,0 @@
-setlocal expandtab
-setlocal tabstop=4
-setlocal shiftwidth=4
-"setlocal omnifunc=v:lua.vim.lsp.omnifunc

.config/nvim/ftdetect/crontab.lua

@@ -0,0 +1,6 @@
+vim.api.nvim_create_autocmd({ "filetype" }, {
+	pattern = "crontab",
+	callback = function()
+		vim.api.nvim_buf_set_option(vim.api.nvim_get_current_buf(), "writebackup", false)
+	end
+})

.config/nvim/ftdetect/crontab.vim

@@ -1 +0,0 @@
-autocmd filetype crontab setlocal nowritebackup

.config/nvim/ftdetect/html.twig.lua

@@ -0,0 +1,6 @@
+vim.api.nvim_create_autocmd({ "BufNewFile", "BufRead" }, {
+	pattern = "*.html.twig",
+	callback = function()
+		vim.api.nvim_buf_set_option(vim.api.nvim_get_current_buf(), "syntax", "html")
+	end
+})

.config/nvim/ftdetect/html.twig.vim

@@ -1 +0,0 @@
-autocmd BufNewFile,BufRead *.html.twig set syntax=html

.config/nvim/ftplugin/cpp.lua

@@ -0,0 +1 @@
+vim.bo.expandtab = true

.config/nvim/ftplugin/cpp.vim

@@ -1 +0,0 @@
-setlocal et

.config/nvim/ftplugin/css.lua

@@ -0,0 +1,3 @@
+vim.bo.expandtab = true
+vim.bo.tabstop = 2
+vim.bo.shiftwidth = 2

.config/nvim/ftplugin/css.vim

@@ -1,4 +0,0 @@
-setlocal et
-setlocal ts=2
-setlocal sts=2
-setlocal sw=2

.config/nvim/ftplugin/elna.lua

@@ -0,0 +1,3 @@
+vim.bo.expandtab = true
+vim.bo.tabstop = 2
+vim.bo.shiftwidth = 2

.config/nvim/ftplugin/haskell.lua

@@ -0,0 +1,4 @@
+vim.bo.tabstop = 8
+vim.bo.expandtab = true
+vim.bo.softtabstop = 4
+vim.bo.shiftwidth = 4

.config/nvim/ftplugin/java.lua

@@ -23,59 +23,59 @@ end
 
 -- See `:help vim.lsp.start_client` for an overview of the supported `config` options.
 local config = {
-  on_attach = on_attach,  -- We pass our on_attach keybindings to the configuration map
+	on_attach = on_attach,  -- We pass our on_attach keybindings to the configuration map
-  flags = {
+	flags = {
-    debounce_text_changes = 150,
+		debounce_text_changes = 150,
-  },
+	},
 
-  -- The command that starts the language server
+	-- The command that starts the language server
-  -- See: https://github.com/eclipse/eclipse.jdt.ls#running-from-the-command-line
+	-- See: https://github.com/eclipse/eclipse.jdt.ls#running-from-the-command-line
-  cmd = {
+	cmd = {
-    'java',
+		'java',
 
-    '-Declipse.application=org.eclipse.jdt.ls.core.id1',
+		'-Declipse.application=org.eclipse.jdt.ls.core.id1',
-    '-Dosgi.bundles.defaultStartLevel=4',
+		'-Dosgi.bundles.defaultStartLevel=4',
-    '-Declipse.product=org.eclipse.jdt.ls.core.product',
+		'-Declipse.product=org.eclipse.jdt.ls.core.product',
-    '-Dlog.protocol=true',
+		'-Dlog.protocol=true',
-    '-Dlog.level=ALL',
+		'-Dlog.level=ALL',
-    '-Xms1g',
+		'-Xms1g',
-    '--add-modules=ALL-SYSTEM',
+		'--add-modules=ALL-SYSTEM',
-    '--add-opens', 'java.base/java.util=ALL-UNNAMED',
+		'--add-opens', 'java.base/java.util=ALL-UNNAMED',
-    '--add-opens', 'java.base/java.lang=ALL-UNNAMED',
+		'--add-opens', 'java.base/java.lang=ALL-UNNAMED',
 
-    '-jar', jdtls_home .. '/plugins/org.eclipse.equinox.launcher_1.6.900.v20240613-2009.jar',
+		'-jar', jdtls_home .. '/plugins/org.eclipse.equinox.launcher_1.6.900.v20240613-2009.jar',
-    '-configuration', jdtls_home .. '/config_linux',
+		'-configuration', jdtls_home .. '/config_linux',
-    '-data', os.getenv('HOME') .. '/.cache/jdtls/' .. project_name
+		'-data', os.getenv('HOME') .. '/.cache/jdtls/' .. project_name
-  },
+	},
 
-  -- This is the default if not provided, you can remove it. Or adjust as needed.
+	-- This is the default if not provided, you can remove it. Or adjust as needed.
-  -- One dedicated LSP server & client will be started per unique root_dir
+	-- One dedicated LSP server & client will be started per unique root_dir
-  root_dir = vim.fs.root(0, {'.git', 'mvnw', 'gradlew', 'build.gradle'}),
+	root_dir = vim.fs.root(0, {'.git', 'mvnw', 'gradlew', 'build.gradle'}),
 
-  -- Here you can configure eclipse.jdt.ls specific settings
+	-- Here you can configure eclipse.jdt.ls specific settings
-  -- See https://github.com/eclipse/eclipse.jdt.ls/wiki/Running-the-JAVA-LS-server-from-the-command-line#initialize-request
+	-- See https://github.com/eclipse/eclipse.jdt.ls/wiki/Running-the-JAVA-LS-server-from-the-command-line#initialize-request
-  -- for a list of options
+	-- for a list of options
-  settings = {
+	settings = {
-    java = {
+		java = {
-      signatureHelp = { enabled = true },
+			signatureHelp = { enabled = true },
-      jdt = {
+			jdt = {
-        ls = {
+				ls = {
-          androidSupport = { enabled = true },
+				  androidSupport = { enabled = true },
-        }
+				}
-      }
+			}
-    }
+		}
-  },
+	},
 
-  -- Language server `initializationOptions`
+	-- Language server `initializationOptions`
-  -- You need to extend the `bundles` with paths to jar files
+	-- You need to extend the `bundles` with paths to jar files
-  -- if you want to use additional eclipse.jdt.ls plugins.
+	-- if you want to use additional eclipse.jdt.ls plugins.
-  --
+	--
-  -- See https://github.com/mfussenegger/nvim-jdtls#java-debug-installation
+	-- See https://github.com/mfussenegger/nvim-jdtls#java-debug-installation
-  --
+	--
-  -- If you don't plan on using the debugger or other eclipse.jdt.ls plugins you can remove this
+	-- If you don't plan on using the debugger or other eclipse.jdt.ls plugins you can remove this
-  init_options = {
+	init_options = {
-    bundles = {}
+		bundles = {}
-  },
+	}
 }
 -- This starts a new client & server,
 -- or attaches to an existing client & server depending on the `root_dir`.

.config/nvim/ftplugin/javascript.lua

@@ -0,0 +1,3 @@
+vim.bo.expandtab = true
+vim.bo.tabstop = 2
+vim.bo.shiftwidth = 2

.config/nvim/ftplugin/javascript.vim

@@ -1,4 +0,0 @@
-setlocal et
-setlocal ts=2
-setlocal sts=2
-setlocal sw=2

.config/nvim/ftplugin/less.lua

@@ -0,0 +1,3 @@
+vim.bo.expandtab = true
+vim.bo.tabstop = 2
+vim.bo.shiftwidth = 2

.config/nvim/ftplugin/less.vim

@@ -1,4 +0,0 @@
-setlocal et
-setlocal ts=2
-setlocal sts=2
-setlocal sw=2

.config/nvim/ftplugin/modula2.lua

@@ -0,0 +1,3 @@
+vim.bo.expandtab = true
+vim.bo.tabstop = 2
+vim.bo.shiftwidth = 2

.config/nvim/ftplugin/php.lua

@@ -0,0 +1,3 @@
+vim.bo.expandtab = true
+vim.bo.tabstop = 4
+vim.bo.shiftwidth = 4

.config/nvim/ftplugin/ruby.lua

@@ -0,0 +1,3 @@
+vim.bo.expandtab = true
+vim.bo.tabstop = 2
+vim.bo.shiftwidth = 2

.config/nvim/ftplugin/ruby.vim

@@ -1,3 +0,0 @@
-setlocal expandtab
-setlocal tabstop=2
-setlocal shiftwidth=2

.config/nvim/ftplugin/typescript.vim

@@ -1,4 +0,0 @@
-setlocal et
-setlocal ts=2
-setlocal sts=2
-setlocal sw=2

.config/nvim/ftplugin/vue.lua

@@ -0,0 +1,3 @@
+vim.bo.expandtab = true
+vim.bo.tabstop = 2
+vim.bo.shiftwidth = 2

.config/nvim/ftplugin/vue.vim

@@ -1,4 +0,0 @@
-setlocal et
-setlocal ts=2
-setlocal sts=2
-setlocal sw=2

.config/nvim/init.lua

@@ -0,0 +1,119 @@
+vim.opt.tabstop = 4
+vim.opt.shiftwidth = 4
+vim.opt.expandtab = false
+vim.opt.ignorecase = true
+vim.opt.smartcase = true
+vim.opt.ruler = true
+vim.opt.backup = false
+vim.opt.number = true
+vim.opt.colorcolumn = "120"
+vim.opt.exrc = true
+vim.opt.secure = true
+vim.opt.hidden = true
+
+vim.opt.completeopt = { 'menu', 'menuone', 'noselect' }
+vim.opt.shortmess:append('c')
+
+-- Having longer updatetime (default is 4000 ms = 4 s) leads to noticeable
+-- delays and poor user experience.
+vim.opt.updatetime = 300
+
+-- Always show the signcolumn, otherwise it would shift the text each time
+-- diagnostics appear/become resolved.
+-- Recently vim can merge signcolumn and number column into one
+vim.opt.signcolumn = 'yes'
+
+vim.opt.mouse = 'a' -- " Enable mouse in all modes.
+
+--
+-- Packer
+--
+vim.cmd [[packadd packer.nvim]]
+
+require'packer'.startup(function()
+	-- Packer can manage itself
+	use 'wbthomason/packer.nvim'
+
+	use 'mfussenegger/nvim-dap'
+	use 'airblade/vim-gitgutter'
+	use 'neovim/nvim-lspconfig'
+	use 'dense-analysis/ale'
+	use 'liuchengxu/vista.vim' -- Tag bar.
+	use {
+		'nvim-treesitter/nvim-treesitter',
+		run = ':TSUpdate'
+	}
+
+	-- Git.
+	use 'tpope/vim-fugitive'
+	use {
+		'sindrets/diffview.nvim',
+		requires = {'nvim-lua/plenary.nvim'}
+	}
+
+	-- File browser.
+	use {
+		'kyazdani42/nvim-tree.lua',
+		requires = {'nvim-tree/nvim-web-devicons'} -- optional, for file icon
+	}
+	use {
+		'nvim-telescope/telescope.nvim',
+		requires = {'nvim-lua/plenary.nvim'}
+	}
+	use 'nvim-telescope/telescope-ui-select.nvim'
+	use {
+		'kevinhwang91/nvim-ufo',
+		requires = {'kevinhwang91/promise-async'}
+	}
+
+	-- Theme.
+	use 'sainnhe/sonokai'
+	use {
+		'nvim-lualine/lualine.nvim',
+		requires = {'nvim-tree/nvim-web-devicons'} -- optional, for status line icons
+	}
+
+	-- Syntax.
+	use 'leafOfTree/vim-vue-plugin'
+	use 'mfussenegger/nvim-jdtls'
+	use 'dart-lang/dart-vim-plugin'
+	use {
+		'akinsho/flutter-tools.nvim',
+		requires = {
+			'nvim-lua/plenary.nvim'
+		}
+	}
+	use 'vim-vdebug/vdebug'
+
+	-- nvim-cmp
+	use 'dcampos/nvim-snippy'
+	use 'hrsh7th/cmp-nvim-lsp'
+	use 'hrsh7th/nvim-cmp'
+	use 'dcampos/cmp-snippy'
+	use 'hrsh7th/cmp-path'
+	use 'hrsh7th/cmp-buffer'
+end)
+
+require'plugins'
+require'lspserver'
+
+--
+-- Theme
+--
+vim.cmd('colorscheme sonokai')
+vim.opt.termguicolors = true
+
+-- Mappings.
+-- See `:help vim.diagnostic.*` for documentation on any of the below functions
+local opts = { noremap = true, silent = true }
+vim.keymap.set('n', '<space>e', vim.diagnostic.open_float, opts)
+vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, opts)
+vim.keymap.set('n', ']d', vim.diagnostic.goto_next, opts)
+vim.keymap.set('n', '<space>q', vim.diagnostic.setloclist, opts)
+
+-- Custom file types.
+vim.filetype.add({
+	extension = {
+		elna = 'elna'
+	}
+})

.config/nvim/lua/lsphelp.lua

@@ -0,0 +1,31 @@
+-- Helper function for creating keymaps.
+function nnoremap(rhs, lhs, desc)
+	local bufopts = { noremap=true, silent=true, buffer=bufnr, desc = desc }
+
+	vim.keymap.set("n", rhs, lhs, bufopts)
+end
+
+-- Use an on_attach function to only map the following keys
+-- after the language server attaches to the current buffer
+function default_on_attach(client, bufnr)
+	-- Enable completion triggered by <c-x><c-o>
+	vim.api.nvim_buf_set_option(bufnr, 'omnifunc', 'v:lua.vim.lsp.omnifunc')
+
+	-- Mappings.
+	-- See `:help vim.lsp.*` for documentation on any of the below functions
+	nnoremap('gD', vim.lsp.buf.declaration, "Go to declaration")
+	nnoremap('gd', vim.lsp.buf.definition, "Go to definition")
+	nnoremap('K', vim.lsp.buf.hover, "Hover text")
+	nnoremap('gi', vim.lsp.buf.implementation, "Go to implementation")
+	nnoremap('<C-k>', vim.lsp.buf.signature_help, "Show signature")
+	nnoremap('<space>wa', vim.lsp.buf.add_workspace_folder, "Add workspace folder")
+	nnoremap('<space>wr', vim.lsp.buf.remove_workspace_folder, "Remove workspace folder")
+	nnoremap('<space>wl', function()
+		print(vim.inspect(vim.lsp.buf.list_workspace_folders()))
+	end, "List workspace folders")
+	nnoremap('<space>D', vim.lsp.buf.type_definition, "Go to type definition")
+	nnoremap('<space>rn', vim.lsp.buf.rename, "Rename")
+	nnoremap('<space>ca', vim.lsp.buf.code_action, "Code actions")
+	nnoremap('gr', vim.lsp.buf.references, "Find references")
+	nnoremap('<space>f', function() vim.lsp.buf.format { async = true } end, "Format file")
+end

.config/nvim/lua/lspserver.lua

@@ -0,0 +1,77 @@
+require'lsphelp'
+local nvim_lsp = require('lspconfig')
+
+nvim_lsp['hls'].setup {
+	on_attach = default_on_attach,
+	capabilities = capabilities,
+	flags = {
+		debounce_text_changes = 150,
+	},
+	settings = {
+		haskell = {
+			plugin = {
+				stan = {
+					globalOn = false
+				}
+			}
+		}
+	}
+}
+nvim_lsp['intelephense'].setup {
+    on_attach = default_on_attach,
+	flags = {
+		debounce_text_changes = 150
+	},
+	init_options = {
+		licenceKey = os.getenv('HOME') .. '/Documents/Schluessel/intelephense.key',
+		storagePath = '/tmp/intelephense'
+	},
+	capabilities = capabilities,
+	settings = {
+		intelephense = {
+			environment = {
+				phpVersion = '8.2.0'
+			}
+		}
+	}
+}
+nvim_lsp['clangd'].setup {
+	on_attach = default_on_attach,
+	capabilities = capabilities
+}
+require("flutter-tools").setup {
+	outline = {
+		open_cmd = "Vista"
+	},
+	lsp = {
+		on_attach = default_on_attach,
+		capabilities = capabilities
+	}
+}
+nvim_lsp['twiggy_language_server'].setup {
+	on_attach = default_on_attach,
+	capabilities = capabilities,
+	settings = {
+		twiggy = {
+			framework = 'symfony',
+			phpExecutable = '/usr/bin/php',
+			symfonyConsolePath = 'bin/console',
+			diagnostics = {
+				twigCsFixer = false
+			}
+        }
+    }
+}
+vim.g.vim_vue_plugin_config = { 
+	syntax = {
+		template = {'html'},
+		script = {'javascript'},
+		style = {'css'},
+	},
+	full_syntax = {},
+	initial_indent = {},
+	attribute = 0,
+	keyword = 0,
+	foldexpr = 0,
+	debug = 0
+}

.config/nvim/lua/plugins.lua

@@ -0,0 +1,202 @@
+--
+-- ALE
+--
+-- Run linters only on save
+vim.g.ale_lint_on_text_changed = 'never'
+vim.g.ale_lint_on_insert_leave = 0
+
+-- Include the linter name (e.g. 'hack' or 'hhast'), code, and message in errors
+vim.g.ale_echo_msg_format = '[%linter%] %s'
+vim.g.ale_linters = {
+	hack = {'hack', 'hhast'},
+	haskell = {"hlint"},
+	javascript = {'eslint'},
+	d = {'dmd'},
+	php = {'phpcs', 'phpstan'},
+	ruby = {'rubocop'},
+	cpp = {},
+	asm = {},
+}
+vim.g.ale_ruby_rubocop_executable = 'bundle'
+vim.g.ale_cpp_cc_options = '-std=c++17 -Wall'
+
+vim.g.ale_open_list = 1
+vim.g.ale_disable_lsp = 1
+
+--
+-- nvim-cmp
+--
+local cmp = require'cmp'
+
+cmp.setup({
+	snippet = {
+		-- REQUIRED - you must specify a snippet engine
+		expand = function(args)
+			require'snippy'.expand_snippet(args.body)
+		end,
+	},
+	mapping = {
+		['<C-b>'] = cmp.mapping(cmp.mapping.scroll_docs(-4), { 'i', 'c' }),
+		['<C-f>'] = cmp.mapping(cmp.mapping.scroll_docs(4), { 'i', 'c' }),
+		['<C-Space>'] = cmp.mapping(cmp.mapping.complete(), { 'i', 'c' }),
+		-- Specify `cmp.config.disable` if you want to remove the default `<C-y>` mapping.
+		['<C-y>'] = cmp.config.disable,
+		['<C-e>'] = cmp.mapping({
+			i = cmp.mapping.abort(),
+			c = cmp.mapping.close(),
+		}),
+		['<CR>'] = cmp.mapping.confirm({ select = false }),
+	},
+	sources = cmp.config.sources({
+		{ name = 'nvim_lsp' },
+		{ name = 'snippy' },
+	}, {
+		{ name = 'path' },
+	}, {
+		{ name = 'buffer' },
+	}),
+	view = {
+		entries = 'native',
+	},
+})
+
+-- Setup lspconfig.
+local capabilities = require('cmp_nvim_lsp').default_capabilities(vim.lsp.protocol.make_client_capabilities())
+capabilities.textDocument.foldingRange = {
+    dynamicRegistration = false,
+    lineFoldingOnly = true
+}
+
+--
+-- Telescope
+--
+require('telescope').setup {
+	extensions = {
+		["ui-select"] = {
+			require("telescope.themes").get_dropdown {
+			}
+		}
+	}
+}
+require("telescope").load_extension("ui-select")
+
+vim.api.nvim_set_keymap('n', '<leader>ff', "<cmd>lua require('telescope.builtin').find_files()<cr>",
+	{ noremap = true, silent = true })
+vim.api.nvim_set_keymap('n', '<leader>fg', "<cmd>lua require('telescope.builtin').live_grep()<cr>",
+	{ noremap = true, silent = true })
+vim.api.nvim_set_keymap('n', '<leader>fb', "<cmd>lua require('telescope.builtin').buffers()<cr>",
+	{ noremap = true, silent = true })
+vim.api.nvim_set_keymap('n', '<leader>fh', "<cmd>lua require('telescope.builtin').help_tags()<cr>",
+	{ noremap = true, silent = true })
+
+--
+-- NvimTree
+--
+require('nvim-tree').setup {}
+
+vim.api.nvim_set_keymap('n', '<C-n>', ':NvimTreeToggle<CR>', { noremap = true })
+vim.api.nvim_set_keymap('n', '<leader>r', ':NvimTreeRefresh<CR>', { noremap = true })
+vim.api.nvim_set_keymap('n', '<leader>n', ':NvimTreeFindFile<CR>', { noremap = true })
+
+--
+-- Lualine
+--
+require('lualine').setup {
+	options = {
+		theme = 'sonokai'
+	},
+	extensions = {'quickfix', 'nvim-tree', 'fugitive'},
+	sections = {
+		lualine_c = {
+			'filename'
+		}
+	}
+}
+
+--
+-- Diffview.nvim
+-- 
+require('diffview').setup {}
+
+--
+-- Vista
+--
+vim.g.vista_default_executive = 'nvim_lsp'
+
+--
+-- nvim-ufo
+--
+vim.wo.foldcolumn = '1'
+vim.wo.foldlevel = 99 -- feel free to decrease the value
+vim.wo.foldenable = true
+
+require('ufo').setup()
+
+--
+-- nvim-dap
+--
+vim.keymap.set('n', '<F5>', function() require('dap').continue() end)
+vim.keymap.set('n', '<F10>', function() require('dap').step_over() end)
+vim.keymap.set('n', '<F11>', function() require('dap').step_into() end)
+vim.keymap.set('n', '<F12>', function() require('dap').step_out() end)
+vim.keymap.set('n', '<Leader>b', function() require('dap').toggle_breakpoint() end)
+vim.keymap.set('n', '<Leader>B', function() require('dap').set_breakpoint() end)
+vim.keymap.set('n', '<Leader>lp', function() require('dap').set_breakpoint(nil, nil, vim.fn.input('Log point message: ')) end)
+vim.keymap.set('n', '<Leader>dr', function() require('dap').repl.open() end)
+vim.keymap.set('n', '<Leader>dl', function() require('dap').run_last() end)
+vim.keymap.set({'n', 'v'}, '<Leader>dh', function()
+	require('dap.ui.widgets').hover()
+end)
+vim.keymap.set({'n', 'v'}, '<Leader>dp', function()
+	require('dap.ui.widgets').preview()
+end)
+vim.keymap.set('n', '<Leader>df', function()
+	local widgets = require('dap.ui.widgets')
+	widgets.centered_float(widgets.frames)
+end)
+vim.keymap.set('n', '<Leader>ds', function()
+	local widgets = require('dap.ui.widgets')
+	widgets.centered_float(widgets.scopes)
+end)
+
+local dap = require("dap")
+dap.adapters.gdb = {
+  type = "executable",
+  command = "gdb",
+  args = { "-i", "dap" }
+}
+dap.configurations.cpp = {
+  {
+    name = "Launch",
+    type = "gdb",
+    request = "launch",
+    program = function()
+      return vim.fn.input('Path to executable: ', vim.fn.getcwd() .. '/', 'file')
+    end,
+    cwd = "${workspaceFolder}",
+    stopAtBeginningOfMainSubprogram = false,
+  },
+}
+
+--
+-- Vdebug
+--
+vim.g.vdebug_options = { port = '9000'  }
+
+--
+-- Treesitter
+--
+require'nvim-treesitter.configs'.setup {
+	ensure_installed = {
+		'haskell', 'php', 'lua', 'css', 'dockerfile', 'html', 'javascript', 'markdown', 'ruby', 'vue'
+	},
+	highlight = {
+		enable = true,
+		additional_vim_regex_highlighting = true
+	}
+}
+
+--
+-- sonokai
+--
+vim.g.sonokai_style = "shusia"

.gitconfig

@@ -0,0 +1,36 @@
+[user]
+	name = Eugen Wissner
+	email = belka@caraus.de
+	signingkey = A27FDC1E8EE902C0
+
+[diff]
+    tool = kitty
+    guitool = kitty.gui
+[difftool]
+    prompt = false
+    trustExitCode = true
+[difftool "kitty"]
+    cmd = kitty +kitten diff $LOCAL $REMOTE
+[difftool "kitty.gui"]
+    cmd = kitty kitty +kitten diff $LOCAL $REMOTE
+
+[merge]
+	tool = fugitive
+[mergetool "fugitive"]
+	cmd = nvim -f -c "Gvdiff!" "$MERGED"
+	prompt = false
+[push]
+	default = simple
+[core]
+	editor = nvim
+	askpass = /usr/bin/ksshaskpass
+[pager]
+	branch = false
+[pull]
+	rebase = false
+#[credential]
+#	helper = /usr/doc/git-2.34.0/contrib/credential/libsecret/git-credential-libsecret
+[gpg]
+	program = gpg
+[init]
+	defaultBranch = master

.gitignore

@@ -1 +1,2 @@
-node_modules/
+.config/nvim/config
+.config/nvim/plugin/

.profile

@@ -1,11 +1,17 @@
-PATH="$HOME/.local/bin:$HOME/.cargo/bin:$HOME/.ghcup/bin:$HOME/.cabal/bin:$PATH"
+PATH="$HOME/.local/bin:$HOME/.cargo/bin:$HOME/.ghcup/bin:$HOME/.cabal/bin:$HOME/.rd/bin:$PATH"
 
 if [ -x /opt/homebrew/bin/brew ]
 then
 	eval "$(/opt/homebrew/bin/brew shellenv)"
 
-	PATH="$HOMEBREW_PREFIX/opt/bison/bin:/usr/local/bin:$PATH"
+	# Overriding Mac OS provided binutils breakes cross compiling binutils. But
-	for tool in libtool coreutils grep gnu-sed findutils make
+	# the binutils project also provides "g"-prefixed binaries.
+	PATH="/usr/local/bin:$PATH:$HOMEBREW_PREFIX/opt/binutils/bin"
+	for tool in flex bison
+	do
+		PATH="$HOMEBREW_PREFIX/opt/$tool/bin:$PATH"
+	done
+	for tool in libtool coreutils grep gnu-sed findutils make gpatch
 	do
 		PATH="$HOMEBREW_PREFIX/opt/$tool/libexec/gnubin:$PATH"
 	done

.tmux.conf

@@ -0,0 +1,18 @@
+set -s escape-time 0
+set -g mouse on
+
+set -g status-keys vi
+set -g mode-keys vi
+
+# Reset bindings without the repeat time
+bind-key Left select-pane -L
+bind-key Right select-pane -R
+bind-key Up select-pane -U
+bind-key Down select-pane -D
+
+# List of plugins
+set -g @plugin 'tmux-plugins/tpm'
+set -g @plugin 'tmux-plugins/tmux-sensible'
+set -g @plugin "arcticicestudio/nord-tmux"
+
+run '~/.tmux/plugins/tpm/tpm'

.yashrc

@@ -12,12 +12,15 @@ bindkey --emacs '\^L' clear-and-redraw-all
 bindkey --vi-insert '\^L' clear-and-redraw-all
 bindkey --vi-command '\^L' clear-and-redraw-all
 
-# Define shortcuts.
-alias rdpwin='xfreerdp /f /sound /v:192.168.0.4 /u:belka@caraus.de'
-
 # Programming environment.
 command -v rbenv >/dev/null 2>&1 && eval "$(rbenv init -)"
 
 command -v fastfetch >/dev/null 2>&1 && fastfetch
 
+read_project_env() {
+	test -x .env.sh && . .env.sh || true
+}
+read_project_env
+
+YASH_AFTER_CD="read_project_env"
 # vim: set ft=sh:

LICENSE

@@ -0,0 +1,373 @@
+Mozilla Public License Version 2.0
+==================================
+
+1. Definitions
+--------------
+
+1.1. "Contributor"
+    means each individual or legal entity that creates, contributes to
+    the creation of, or owns Covered Software.
+
+1.2. "Contributor Version"
+    means the combination of the Contributions of others (if any) used
+    by a Contributor and that particular Contributor's Contribution.
+
+1.3. "Contribution"
+    means Covered Software of a particular Contributor.
+
+1.4. "Covered Software"
+    means Source Code Form to which the initial Contributor has attached
+    the notice in Exhibit A, the Executable Form of such Source Code
+    Form, and Modifications of such Source Code Form, in each case
+    including portions thereof.
+
+1.5. "Incompatible With Secondary Licenses"
+    means
+
+    (a) that the initial Contributor has attached the notice described
+        in Exhibit B to the Covered Software; or
+
+    (b) that the Covered Software was made available under the terms of
+        version 1.1 or earlier of the License, but not also under the
+        terms of a Secondary License.
+
+1.6. "Executable Form"
+    means any form of the work other than Source Code Form.
+
+1.7. "Larger Work"
+    means a work that combines Covered Software with other material, in
+    a separate file or files, that is not Covered Software.
+
+1.8. "License"
+    means this document.
+
+1.9. "Licensable"
+    means having the right to grant, to the maximum extent possible,
+    whether at the time of the initial grant or subsequently, any and
+    all of the rights conveyed by this License.
+
+1.10. "Modifications"
+    means any of the following:
+
+    (a) any file in Source Code Form that results from an addition to,
+        deletion from, or modification of the contents of Covered
+        Software; or
+
+    (b) any new file in Source Code Form that contains any Covered
+        Software.
+
+1.11. "Patent Claims" of a Contributor
+    means any patent claim(s), including without limitation, method,
+    process, and apparatus claims, in any patent Licensable by such
+    Contributor that would be infringed, but for the grant of the
+    License, by the making, using, selling, offering for sale, having
+    made, import, or transfer of either its Contributions or its
+    Contributor Version.
+
+1.12. "Secondary License"
+    means either the GNU General Public License, Version 2.0, the GNU
+    Lesser General Public License, Version 2.1, the GNU Affero General
+    Public License, Version 3.0, or any later versions of those
+    licenses.
+
+1.13. "Source Code Form"
+    means the form of the work preferred for making modifications.
+
+1.14. "You" (or "Your")
+    means an individual or a legal entity exercising rights under this
+    License. For legal entities, "You" includes any entity that
+    controls, is controlled by, or is under common control with You. For
+    purposes of this definition, "control" means (a) the power, direct
+    or indirect, to cause the direction or management of such entity,
+    whether by contract or otherwise, or (b) ownership of more than
+    fifty percent (50%) of the outstanding shares or beneficial
+    ownership of such entity.
+
+2. License Grants and Conditions
+--------------------------------
+
+2.1. Grants
+
+Each Contributor hereby grants You a world-wide, royalty-free,
+non-exclusive license:
+
+(a) under intellectual property rights (other than patent or trademark)
+    Licensable by such Contributor to use, reproduce, make available,
+    modify, display, perform, distribute, and otherwise exploit its
+    Contributions, either on an unmodified basis, with Modifications, or
+    as part of a Larger Work; and
+
+(b) under Patent Claims of such Contributor to make, use, sell, offer
+    for sale, have made, import, and otherwise transfer either its
+    Contributions or its Contributor Version.
+
+2.2. Effective Date
+
+The licenses granted in Section 2.1 with respect to any Contribution
+become effective for each Contribution on the date the Contributor first
+distributes such Contribution.
+
+2.3. Limitations on Grant Scope
+
+The licenses granted in this Section 2 are the only rights granted under
+this License. No additional rights or licenses will be implied from the
+distribution or licensing of Covered Software under this License.
+Notwithstanding Section 2.1(b) above, no patent license is granted by a
+Contributor:
+
+(a) for any code that a Contributor has removed from Covered Software;
+    or
+
+(b) for infringements caused by: (i) Your and any other third party's
+    modifications of Covered Software, or (ii) the combination of its
+    Contributions with other software (except as part of its Contributor
+    Version); or
+
+(c) under Patent Claims infringed by Covered Software in the absence of
+    its Contributions.
+
+This License does not grant any rights in the trademarks, service marks,
+or logos of any Contributor (except as may be necessary to comply with
+the notice requirements in Section 3.4).
+
+2.4. Subsequent Licenses
+
+No Contributor makes additional grants as a result of Your choice to
+distribute the Covered Software under a subsequent version of this
+License (see Section 10.2) or under the terms of a Secondary License (if
+permitted under the terms of Section 3.3).
+
+2.5. Representation
+
+Each Contributor represents that the Contributor believes its
+Contributions are its original creation(s) or it has sufficient rights
+to grant the rights to its Contributions conveyed by this License.
+
+2.6. Fair Use
+
+This License is not intended to limit any rights You have under
+applicable copyright doctrines of fair use, fair dealing, or other
+equivalents.
+
+2.7. Conditions
+
+Sections 3.1, 3.2, 3.3, and 3.4 are conditions of the licenses granted
+in Section 2.1.
+
+3. Responsibilities
+-------------------
+
+3.1. Distribution of Source Form
+
+All distribution of Covered Software in Source Code Form, including any
+Modifications that You create or to which You contribute, must be under
+the terms of this License. You must inform recipients that the Source
+Code Form of the Covered Software is governed by the terms of this
+License, and how they can obtain a copy of this License. You may not
+attempt to alter or restrict the recipients' rights in the Source Code
+Form.
+
+3.2. Distribution of Executable Form
+
+If You distribute Covered Software in Executable Form then:
+
+(a) such Covered Software must also be made available in Source Code
+    Form, as described in Section 3.1, and You must inform recipients of
+    the Executable Form how they can obtain a copy of such Source Code
+    Form by reasonable means in a timely manner, at a charge no more
+    than the cost of distribution to the recipient; and
+
+(b) You may distribute such Executable Form under the terms of this
+    License, or sublicense it under different terms, provided that the
+    license for the Executable Form does not attempt to limit or alter
+    the recipients' rights in the Source Code Form under this License.
+
+3.3. Distribution of a Larger Work
+
+You may create and distribute a Larger Work under terms of Your choice,
+provided that You also comply with the requirements of this License for
+the Covered Software. If the Larger Work is a combination of Covered
+Software with a work governed by one or more Secondary Licenses, and the
+Covered Software is not Incompatible With Secondary Licenses, this
+License permits You to additionally distribute such Covered Software
+under the terms of such Secondary License(s), so that the recipient of
+the Larger Work may, at their option, further distribute the Covered
+Software under the terms of either this License or such Secondary
+License(s).
+
+3.4. Notices
+
+You may not remove or alter the substance of any license notices
+(including copyright notices, patent notices, disclaimers of warranty,
+or limitations of liability) contained within the Source Code Form of
+the Covered Software, except that You may alter any license notices to
+the extent required to remedy known factual inaccuracies.
+
+3.5. Application of Additional Terms
+
+You may choose to offer, and to charge a fee for, warranty, support,
+indemnity or liability obligations to one or more recipients of Covered
+Software. However, You may do so only on Your own behalf, and not on
+behalf of any Contributor. You must make it absolutely clear that any
+such warranty, support, indemnity, or liability obligation is offered by
+You alone, and You hereby agree to indemnify every Contributor for any
+liability incurred by such Contributor as a result of warranty, support,
+indemnity or liability terms You offer. You may include additional
+disclaimers of warranty and limitations of liability specific to any
+jurisdiction.
+
+4. Inability to Comply Due to Statute or Regulation
+---------------------------------------------------
+
+If it is impossible for You to comply with any of the terms of this
+License with respect to some or all of the Covered Software due to
+statute, judicial order, or regulation then You must: (a) comply with
+the terms of this License to the maximum extent possible; and (b)
+describe the limitations and the code they affect. Such description must
+be placed in a text file included with all distributions of the Covered
+Software under this License. Except to the extent prohibited by statute
+or regulation, such description must be sufficiently detailed for a
+recipient of ordinary skill to be able to understand it.
+
+5. Termination
+--------------
+
+5.1. The rights granted under this License will terminate automatically
+if You fail to comply with any of its terms. However, if You become
+compliant, then the rights granted under this License from a particular
+Contributor are reinstated (a) provisionally, unless and until such
+Contributor explicitly and finally terminates Your grants, and (b) on an
+ongoing basis, if such Contributor fails to notify You of the
+non-compliance by some reasonable means prior to 60 days after You have
+come back into compliance. Moreover, Your grants from a particular
+Contributor are reinstated on an ongoing basis if such Contributor
+notifies You of the non-compliance by some reasonable means, this is the
+first time You have received notice of non-compliance with this License
+from such Contributor, and You become compliant prior to 30 days after
+Your receipt of the notice.
+
+5.2. If You initiate litigation against any entity by asserting a patent
+infringement claim (excluding declaratory judgment actions,
+counter-claims, and cross-claims) alleging that a Contributor Version
+directly or indirectly infringes any patent, then the rights granted to
+You by any and all Contributors for the Covered Software under Section
+2.1 of this License shall terminate.
+
+5.3. In the event of termination under Sections 5.1 or 5.2 above, all
+end user license agreements (excluding distributors and resellers) which
+have been validly granted by You or Your distributors under this License
+prior to termination shall survive termination.
+
+************************************************************************
+*                                                                      *
+*  6. Disclaimer of Warranty                                           *
+*  -------------------------                                           *
+*                                                                      *
+*  Covered Software is provided under this License on an "as is"       *
+*  basis, without warranty of any kind, either expressed, implied, or  *
+*  statutory, including, without limitation, warranties that the       *
+*  Covered Software is free of defects, merchantable, fit for a        *
+*  particular purpose or non-infringing. The entire risk as to the     *
+*  quality and performance of the Covered Software is with You.        *
+*  Should any Covered Software prove defective in any respect, You     *
+*  (not any Contributor) assume the cost of any necessary servicing,   *
+*  repair, or correction. This disclaimer of warranty constitutes an   *
+*  essential part of this License. No use of any Covered Software is   *
+*  authorized under this License except under this disclaimer.         *
+*                                                                      *
+************************************************************************
+
+************************************************************************
+*                                                                      *
+*  7. Limitation of Liability                                          *
+*  --------------------------                                          *
+*                                                                      *
+*  Under no circumstances and under no legal theory, whether tort      *
+*  (including negligence), contract, or otherwise, shall any           *
+*  Contributor, or anyone who distributes Covered Software as          *
+*  permitted above, be liable to You for any direct, indirect,         *
+*  special, incidental, or consequential damages of any character      *
+*  including, without limitation, damages for lost profits, loss of    *
+*  goodwill, work stoppage, computer failure or malfunction, or any    *
+*  and all other commercial damages or losses, even if such party      *
+*  shall have been informed of the possibility of such damages. This   *
+*  limitation of liability shall not apply to liability for death or   *
+*  personal injury resulting from such party's negligence to the       *
+*  extent applicable law prohibits such limitation. Some               *
+*  jurisdictions do not allow the exclusion or limitation of           *
+*  incidental or consequential damages, so this exclusion and          *
+*  limitation may not apply to You.                                    *
+*                                                                      *
+************************************************************************
+
+8. Litigation
+-------------
+
+Any litigation relating to this License may be brought only in the
+courts of a jurisdiction where the defendant maintains its principal
+place of business and such litigation shall be governed by laws of that
+jurisdiction, without reference to its conflict-of-law provisions.
+Nothing in this Section shall prevent a party's ability to bring
+cross-claims or counter-claims.
+
+9. Miscellaneous
+----------------
+
+This License represents the complete agreement concerning the subject
+matter hereof. If any provision of this License is held to be
+unenforceable, such provision shall be reformed only to the extent
+necessary to make it enforceable. Any law or regulation which provides
+that the language of a contract shall be construed against the drafter
+shall not be used to construe this License against a Contributor.
+
+10. Versions of the License
+---------------------------
+
+10.1. New Versions
+
+Mozilla Foundation is the license steward. Except as provided in Section
+10.3, no one other than the license steward has the right to modify or
+publish new versions of this License. Each version will be given a
+distinguishing version number.
+
+10.2. Effect of New Versions
+
+You may distribute the Covered Software under the terms of the version
+of the License under which You originally received the Covered Software,
+or under the terms of any subsequent version published by the license
+steward.
+
+10.3. Modified Versions
+
+If you create software not governed by this License, and you want to
+create a new license for such software, you may create and use a
+modified version of this License if you rename the license and remove
+any references to the name of the license steward (except to note that
+such modified license differs from this License).
+
+10.4. Distributing Source Code Form that is Incompatible With Secondary
+Licenses
+
+If You choose to distribute Source Code Form that is Incompatible With
+Secondary Licenses under the terms of this version of the License, the
+notice described in Exhibit B of this License must be attached.
+
+Exhibit A - Source Code Form License Notice
+-------------------------------------------
+
+  This Source Code Form is subject to the terms of the Mozilla Public
+  License, v. 2.0. If a copy of the MPL was not distributed with this
+  file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+If it is not possible or desirable to put the notice in a particular
+file, then You may include the notice in a location (such as a LICENSE
+file in a relevant directory) where a recipient would be likely to look
+for such a notice.
+
+You may add additional accurate notices of copyright ownership.
+
+Exhibit B - "Incompatible With Secondary Licenses" Notice
+---------------------------------------------------------
+
+  This Source Code Form is "Incompatible With Secondary Licenses", as
+  defined by the Mozilla Public License, v. 2.0.

README.md

@@ -0,0 +1,13 @@
+My private configuration files for some software I'm using.
+The most things work on Linux and MacOS.
+
+## Honorable mentions
+
+- yash
+- tmux
+- neovim
+- git
+- aerc
+- kitty
+- mpv
+- zathura